Quitting Recording. JVC UXQD90S

UX-QD90[UG_UX]-04.fm Page 45 Friday, October 21, 2005 10:01 AM

(Continued)

Recording Sound to Cassette Tapes

3

Select a sound source for recording.

• Before selecting a sound source, make sure to stop a disc .

Sound source Operation

Disc

Radio broadcast

Sound from other equipment

(AUX)

Press , and then press .

Select the radio station whose broadcast you want to record ( page 21).

Press and prepare playback on the other equipment ( page 43).

4

Press on the main unit.

Example: Display while CD sound is recorded

• When you record from a disc, all tracks are recorded to the cassette tape .

• When you want to record sound from other equipment, start playback on the connected equipment.

•

When recording finishes, the color of the display window, the disc tray and the circumference of the VOLUME control switches to red to inform you that recording has ended.

Quitting Recording

Press .

Recording Only One Track from a Disc

Before proceeding to step 4, play back the track you want to record.

• Pressing in step 4 returns playback to the beginning of the track and only that track is recorded.

• This one-track recording is not available for

DVD VIDEOs or DVD VRs.

Introduction

For the locations of remote control buttons, refer to page 44.

Recording the Second or

Subsequent Track to the Last

Track from a Disc

(For a DVD VIDEO or DVD VR: while the playback is paused)

(For DVD VR: only when recording in original program)

■ For a CD/VCD/SVCD/DVD VIDEO

Before proceeding to step 4, select the starting track/chapter number by pressing or .

■ For a DVD AUDIO/MP3/WMA

Before proceeding to step 4, select the group number by pressing

, and then select the track number by pressing or .

or

Program Recording from a

Disc

Before proceeding to step 4, program the tracks you want to record

( page 32).

Recording with No Blank Time between Tracks

Before proceeding to step 4, play back a disc, pause the playback, and then press to return to the beginning of the first track.

Erasing Recorded Sound from a Cassette Tape

Select the sound from other equipment (AUX) in step 3, and then press

.

• Do not play back any tracks on the connected equipment.

NOTE

• If the cassette tape reverses direction while a track is being recorded from a disc, that track is recorded again from the beginning on the reverse side of the tape. However, if 12 or less seconds of that track were recorded on the first side of the tape, recording on the reverse side of the tape starts from the beginning of the previous track.

45