Using the Remote Control and Basic Functions. Sony KV-20S90, KV 13M42

Using the Remote Control and Basic Functions

Using the Remote Control and

Basic Functions

This section shows you how to use more advanced buttons on the remote control and how to use the on-screen menus.

.

Button Description

Press when you want to turn the TV on and off.

MUTING

SLEEP

POWER

MTS

JUMP

RESET

VOL

TV

ENTER

MENU

SELECT

CH

RM-Y155

0 9

Turns the TV off automatically in approximately 30, 60 or 90 minutes. Cancel by pressing until SLEEP OFF appears.

Instantly turns off the sound. Press again or press to restore sound.

Cycles through the available video inputs.

Press once to show current time, (if set) and channel number. Press again to activate CAPTION VISION settings, if available. To cancel, press again until

DISPLAY OFF appears.

Cycles through the Multi-Channel TV

Sound (MTS) options: STEREO, SAP

(Second Audio Programming) and

MONO, (KV-20S90 only).

Press for channel selection, the channel will change after 2 seconds.

Press after selecting a channel using the

0 9 buttons to immediately activate selection.

Alternates back and forth between the last two channels selected with the

0 9 buttons.

Displays the on-screen menu. Press again to exit the menu at any time.

Activates highlighted selections in the on-screen menu.

The remote control shown (RM-Y155) is for KV-20S90. For KV-13M42 and

KV-20M42 models, your remote control does not have the MTS button.

9

Operating Instructions

Moves the cursor in the on-screen menu.

Press to restore factory settings while in the on-screen menu.

Press when you want to change channels.

Press when you want to adjust the volume.

If you lost your remote control, see page 26

10

Using the Remote Control and Basic Functions

Setting Up the TV Automatically

After you have finished connecting your TV, you will want to run AUTO

PROGRAM to set up your channels, (KV-13M42, see page 17 for

information on AUTO PROGRAM).

For models KV-20M42, KV-20S90 only

1

Press to turn on the TV, the Initial setup screen appears.

(U.S. models only) (Canadian models only)

2 Make your language selection, the on-screen menus will change to reflect your choice.

3 Follow the on-screen instructions to continue AUTO SET UP or for a

DEMO of the menus.

For U.S. models only

4 Press to operate the on-screen menus without the remote control. Follow the on-screen instructions to make adjustments to your TV settings.

To perform Auto Setup again

Press the and steps 2-4.

buttons on the front panel of the TV and follow

To reset your TV to factory settings, turn the TV on. Then, while pressing the

button on the remote control, press POWER on the TV. The TV will turn itself off, then back on, the original settings will be restored.

11

Operating Instructions

Quick Start to the Menus

The following settings are available in your on-screen menus:

Menu Allows you to

Make adjustments to your picture settings.

Choose from available audio features, such as Multi-

Channel Sound, (KV-20S90 only).

Set the clock on your TV

(CURRENT TIME SET) and program scheduled viewing

(ON/OFF TIMER)

(Except KV-13M42).

Program your channels, set

TV rating, or select menu language.

The CHANNEL SET UP menu is a sub-menu that provides further options for setting up your channels.

The menus shown are for KV-20S90. Your menus may not look like those illustrated.

12