Loading the Salt into the Softener. Candy Dishwasher

7 5

6

1 2

Step 2: select a certain level of salt consumption

Press the Start/pause button to select the proper set according to your local environment,

the sets will change in the following sequence: H1->H2->H3->H4->H5->H6;

3

Step 3: Exit the status of salt adjustment

4

There are 6 levels of salt consumption in all.It is recommended to select the level according to below table:

Water Hardness level dH 1)

mmol/l

2)

Setting on the water softener

Digital display stalls

0-5 0-0.9

1

6-11

12-17

18-22

1.0-2.0

2.1-3.0

3.1-4.0

2

3

4 *

23-34 4.1-6.1

5

35-45 6.2-8.0

6

1) German degree of measurement for the water hardness

2) millimol, internationel unit for water hardness

*) factory setting

Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can leave spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.

The volume of the rinse aid container is about 110ml.

Function of Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

5