advertisement
Section 3: Operation
3.4.7 Advanced Menu
The Advanced menu consists of six menus that enable advanced operators, administrators and installers to define numerous operating parameters, work with lamp settings, ad a new lens, load and/or display test patterns, set up users and define their access rights.
Advanced: Preferences Menu
The Advanced: Preferences menu provides access to various system parameters, as shown in
.
This is further described in Summary Advanced: Preferences Menu Options below.
Choose the level of data logging for the projector.
Enter # hours you expect to log on the lamp before expiry.
Enable to display a message when lamp expires (reaches lamp limit).
Enable to display message when lamp over heats.
Enable to display message when fan fails.
Enable to display a “Lamp
Rotation Required” message when lamp reaches
50% of its expired life.
Sets the time delay for the toggle buttons in milliseconds.
Enable calendar from which a date can be chosen.
Select time. Click Set to save adjustment.
Enable to display time in a 24-hour format, disable for 12-hour standard format.
Choose a time zone.
Enable to display various temperature variables in °C.
Figure 3-25 Advanced: Preferences Menu Options
Table 3.13 Summary of the Advanced: Preferences Menu Options
ADVANCED: PREFERENCES MENU OPTIONS
Lamp Expiry
Expiry Message
Alarm Triggers
Toggle Delay
Language
Data Logging
Temperature Display Mode
Date
Time
Enter the number of hours (0 - xxxx) that are expected to be logged on the current lamp.
When checked, an alert window displays when the lamp expiry is reached.
Choose the conditions you want to trigger an Alarm Window (in addition to interlocks, communication faults, DMD over-temperature and lamp failures which are all permanent triggers). It is strongly recommended all triggers remain enabled during normal operation. Disable only in rare emergencies when the alarm appears to be malfunctioning without real errors.
Sets the time delay for the toggle buttons. Time is recorded in milliseconds.
Choose a default language for all web UI screens. The login window will also display in this language, but can be modified at any time.
Choose the level of data logging for the projector. Options include Minimal, Normal, and Debug .
Select whether to display temperature in Celsius or Fahrenheit.
Reset date as desired. Click the calendar icon to display a calendar from which you can select a date.
Click the clock icon to reset the displayed time. Choose from 24-hour or standard 12-hour formats.
Time is always displayed on each window in the chosen format. Time Zone - Choose the time-zone.
3-32 CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
advertisement
Related manuals
advertisement
Table of contents
- 44 Guidelines for Using the CDP
- 45 Icons
- 45 Pull-Down Lists
- 46 Using Slide Bar Controls
- 46 Editing Text or Numerical Values
- 46 Channel Menu
- 47 Lamp Menu
- 47 Lens Control Menu
- 48 Configuration Menu
- 49 Status Menu and Alarm Conditions
- 49 Test Patterns Menu
- 53 Power ON or OFF
- 53 Turn the Lamp ON or OFF
- 53 Open or Close the Douser (Shutter)
- 53 Display a Test Pattern
- 53 Move the Auxiliary Lens
- 54 Intelligent Lens System (ILS)
- 54 To Enable ILS Per Channel
- 54 To Edit Active Channel ILS Settings
- 54 To Temporarily Alter the Active Channel ILS Settings
- 54 Start Features or Presentations
- 55 Status: System Menu
- 58 Status: Test Menu
- 59 Status: Status Summary Menu
- 59 Status: SMPTE Errors Menu
- 60 Status: Interrogator Menu
- 61 How to Respond to an Alarm Window
- 61 Setting Alarm Triggers
- 62 Channel: Page 1 and Page 2 Menus
- 62 Channel: Page 1 Menu
- 64 Channel: Page 2 Menu
- 65 Channel: 3D Control Menu
- 67 Channel: Lamp Per Channel Menu
- 68 Channel: Lens Menu
- 69 Channel: Lens Menu Disabled
- 70 Advanced: Preferences Menu
- 71 Advanced: Lamp Menu
- 72 Advanced: Lamp History Menu
- 73 Advanced: Lens Menu
- 74 Advanced: Test Patterns Menu
- 75 Advanced: User Menu
- 76 Admin: Source Menu
- 78 Admin: Screen Menu
- 80 Admin: MCGD Menu
- 82 Admin: TCGD Menu
- 83 Admin: Network Menu
- 84 Admin: General Menu
- 85 Admin: Lamp Menu
- 88 Using the Web User Interface
- 88 Using the CDP
- 88 If the Lamp Fails to Ignite
- 89 Using LiteLOC™
- 89 Adjusting Lamp Position (LampLOC™)
- 91 When to Replace a Lamp
- 91 Lamp Rotation
- 91 Maintaining Footlamberts
- 92 Focus
- 92 Offsets
- 92 Zoom
- 94 Hardware Instructions
- 94 Web User Interface Instructions
- 96 3D Test Pattern
- 96 Image Breakup
- 96 No 3D Effect
- 96 Ghosting / Cross-talk
- 96 Motion Artifacts
- 96 Single 3D Input Not Working
- 98 Projector Variables: Using an Anamorphic Lens
- 99 Projector Variables: Using a Wide Converter Lens
- 99 Theatre Variables: Masking
- 103 Wear Protective Clothing
- 103 Cool the Lamp Completely
- 105 Filling the Coolant Reservoir
- 107 Lamp Fan
- 107 Igniter
- 108 Airflow Interlocks
- 108 Laminar Airflow Device (LAD)