Configuration. Mettler Toledo IND231-IND236

2.2.1.1.

2.2.1.2.

Function Keys

Table 2-1 explains the function of each of the keys during normal operation. Further details about

keypad functions while in the setup menu are provided in Chapter 3, Configuration.

Keys

Table 2-1: Keypad Functions – Normal Operation

Function

FUNCTION 1

FUNCTION 2

Explanation

Function varies depending on what is selected in the menu.

Function varies depending on what is selected in the menu.

ZERO

CLEAR

Transfer /

Print / Enter

Key

Used to reset the displayed weight to Zero.

TARE

Captures current weight as a tare value, and sets terminal to Net mode.

When in the net weight mode, press CLEAR to clear the current tare value; the display will revert to the gross weight value. CLEAR operates regardless of motion on the scale.

Note that once the tare value has been cleared, it cannot be recalled. The complete tare process as described above must be performed.

• Send information to the RS232 interface

• Access to setup menu by long pressing the icon

• Used for printing application

• Press the ENTER key to accept the item or selection and move to the next display.

The ZERO and TARE functions will not operate when there is motion on the scale. If one of these keys is pressed while the scale is in motion, the command will be retained for the programmed number of seconds while the terminal waits for no-motion. If a no-motion condition is not detected within the timeout period, the request is cancelled and discarded.

Direction Keys

The direction keys in Table 2-2 are used for changing focus between on-screen items, for

confirming a selection.

Keys Function

LEFT

RIGHT

Table 2-2: Direction Keys

Explanation

• Move the focus left

• Back to previous menu

• Move the focus right

• Access to the next submenu

2-2 METTLER TOLEDO IND231/IND236 User's Guide 30094756 | 04 | 04/2021