SPECIFICATIONS. TAD TAD-R1

TAD-R1_En.book 18 ページ ２００６年１２月４日　月曜日　午後２時４２分

SPECIFICATIONS

Model Name

TAD Reference One

Model No.

TAD-R1

Design

3-way vented box

Drive units

Bass driver....................... 25 cm (10 in.) cone x2

Midrange/Tweeter ............................. concentric

16 cm (6 1 / 2 in.) cone/ 3.5 cm (1 3 / 8 in.) dome

Performance Data

Frequency Range..........21 Hz to 100 kHz ( 10 dB)

25 Hz to 20 kHz, ±3 dB; frontal average response

Crossover Frequencies.................250 Hz, and 2 kHz

Amplifier Requirements...................50 W to 300 W

Sensitivity

........90 dB @ 2.83 V and 1 m (anechoic conditions)

Maximum Output ........................................ 115 dB

Nominal Impedance......4 ohms (minimum 4.1 ohms)

Physical Data

Weight...............................................150 kg (330 lb)

Dimensions

Height .................................. 1293 mm (50 7 / 8 in.)

Width.................................. 554 mm (21 13 / 16 in.)

Depth ..................................... 698 mm (27 1 / 2 in.)

Supplied accessories

Guide to unpacking unit (Attached to exterior of packaging)

Accessory kit

• Cleaning cloth x 1

• Shorting links x 2

• Cone-shaped spikes x 3

• Round spikes x 3

• Hex wrench x 1

• This Owner’s Manual x 1

Note : Included parts may vary slightly by region.

The specifications and construction details in this and related TAD publications are subject to change without notice. The TAD logo is a registered trademark of

Technical Audio Devices, Inc.

27 1 /

2

in.

(698 mm)

50 7 /

8

in.

(1293 mm)

21 13 /

16

in.

(554 mm)

Figure 12. Overall dimensions of the TAD Reference

One loudspeaker.

18

TAD Reference One Owner’s Manual