DEAR CUSTOMER. TAD TAD-R1
Add to My manuals20 Pages
TAD TAD-R1 is a high-performance loudspeaker system that utilizes cutting-edge technology to deliver an exceptional auditory experience. Central to its design is the Coherent Source Transducer (CST), a concentric unit featuring beryllium-diaphragm design. This innovative technology provides a point source radiator covering a wide frequency range, resulting in accurate and detailed sound reproduction. The CST is complemented by dual 25 cm (10 in.) bass drivers housed in a structurally inert cabinet, delivering deep and resonant bass.
advertisement
TAD-R1_En.book 19 ページ 2006年12月4日 月曜日 午後2時42分
DEAR CUSTOMER
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment.
Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. one that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
· Start your volume control at a low setting.
· Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have found a comfortable sound level:
· Set the volume control and leave it there.
We Want You Listening For A Lifetime...
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection: dB
Level Example*
30
40
50
60
Quiet library, or soft whispers
Living room, refrigerator, or bedroom away from traffic
Light traffic, normal conversation, or quiet office
Air conditioner at 20 feet, or sewing machine
70
80
Vacuum cleaner, hair dryer, or noisy restaurant
Average city traffic, garbage disposals, or alarm clock at two feet
The following noises can be dangerous under constant exposure:
90
100
120
140
Subway, motorcycle, truck traffic, or lawn mower
Garbage truck, chain saw, or pneumatic drill
Rock band concert in front of speakers, or thunderclap
Gunshot blast, or jet plane
180 Rocket launching pad
*Information courtesy of the Deafness Research Foundation.
Published by Technical Home Audio. Copyright © 2006 Technical Audio Devices, Inc. All rights reserved.
TAD Reference One Owner’s Manual
19
TAD-R1_En.book 20 ページ 2006年12月4日 月曜日 午後2時42分
®
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
20
TAD Reference One Owner’s Manual
K002_A_En
<SRB1341-A>
advertisement
Related manuals
advertisement
Table of contents
- 4 INTRODUCTION
- 4 TAD History
- 4 TAD Reference One Description
- 4 About The Manual And Warranty
- 5 TECHNOLOGY
- 5 Beryllium Diaphragms
- 6 Bass Drivers
- 7 CST Mounting Construction
- 7 Bass Enclosure Construction
- 7 Crossover Networks
- 7 Enclosure Finish
- 8 INSTALLATION AND PLACEMENT
- 8 Concerning The Placement Of This Unit
- 9 Installing The Spikes
- 9 Removing The Grille Covers
- 12 CONNECTING THE LOUDSPEAKERS
- 12 Single-Wire Connections
- 13 Bi-Wire Connections
- 14 Bi-Amplification Connections
- 14 Vertical Bi-Amping
- 15 Horizontal Bi-Amping
- 16 OPTIMIZING THE SYSTEM
- 16 Improving Bass Performance
- 16 Improving Imaging
- 16 Final Optimization
- 17 LOUDSPEAKER CARE
- 18 SPECIFICATIONS
- 19 DEAR CUSTOMER