advertisement
After adding the ALD:
Set OFF
If Temp > 82.0 Then ON
If pH > 8.5 Then ON
If Switchx5_1 CLOSED Then ON (remember your switch # may be different)
SIMPLE PUMP SHUT-DOWN EXAMPLE
(add to all your pump programs – return, ATO, skimmer, UV, reactor, etc.)
Before the ALD:
Set ON
If FeedA 005 Then OFF
After adding the ALD:
Set ON
If FeedA 005 Then OFF
If Switchx5_1 CLOSED Then OFF (remember your switch # may be different)
NEPTUNE SYSTEMS LIMITED WARRANTY
Neptune Systems warrants this product to be free from defects in material and workmanship for a period of 1 year from the date of purchase. Probes carry a 90-day warranty. If repair or adjustment is necessary and has not been the result of abuse, misuse, or accidental damage, within the 1-year period, please return the product with proof of purchase, and correction of the defect will be made without charge.
For your protection, items being returned must be carefully packed to prevent damage in shipment and insured against possible damage or loss. Neptune Systems will not be responsible for damage resulting from careless or insufficient packaging. Before returning please obtain a return authorization (RMA) number from Neptune
Systems at (408) 578-3022. Returned merchandise will not be accepted without a RMA number.
Except for the warranty set forth above, Neptune Systems is not responsible for any damages including, but not limited to, consequential damage occurring out of or in connection with the delivery, use or performance of
Neptune Systems’ products. Buyer’s remedies for breach of warranty shall be limited to repair, or replacement and full or partial adjustment to purchase price.
Information in this manual is subject to change without notice. Please see www.neptunesys.com for the latest product information and product updates.
6280 San Ignacio Ave. #E
San Jose, CA 95119 http://www.neptunesys.com [email protected]
Phone 408.578.3022 Fax 408.578.9383
©2010 Neptune Systems - All Rights Reserved
ALD Manual V2
AquaController Apex Wireless Expansion Module - Setup Guide Page 3
advertisement
Related manuals
advertisement
Table of contents
- 3 ADVANCED LEAK DETECTION MODULE – INTRODUCTION
- 3 FEATURES
- 3 PHYSICAL INSTALLATION
- 3 Initial Connections
- 4 Startup
- 4 VERIFY THE INSTALLATION
- 4 CONFIGURING AND TESTING THE ALD
- 4 PROGRAMMING EXAMPLES
- 4 Simple eMail or Sound Alarm Example
- 5 Simple Pump Shut-down Example
- 5 NEPTUNE SYSTEMS LIMITED WARRANTY
- 6 CE DECLARATION OF CONFORMITY