SCPI Standard Commands. Agilent Technologies 8712ES, 8714ET, 8714ES, 8712ET
Add to My manuals320 Pages
Agilent Technologies 8712ES is a powerful network analyzer that provides precise and reliable measurements for a wide range of applications. With its advanced features and capabilities, the 8712ES is an ideal choice for engineers, technicians, and researchers who need to analyze and characterize RF and microwave devices and systems.
advertisement
SCPI Conformance Information
SCPI Standard Commands
SCPI Standard Commands
The analyzer implements the following IEEE 488.2 standard commands:
• *CLS
• *ESE
• *ESE?
• *ESR?
• *IDN?
• *LRN?
• *OPC
• *OPC?
• *OPT?
• *PCB
• *PSC
• *RST
• *SRE
• *SRE?
• *STB?
• *TRG
• *TST?
• *WAI
The analyzer implements the following SCPI 1996.0 standard commands:
• ABORt
• CALCulate[1|2]:DATA?
• CALCulate[1|2]:FORMat
• CALCulate[1|2]:FORMat?
• CALCulate[1|2]:GDAPerture:APERture
Programmer’s Guide 12-3
SCPI Conformance Information
SCPI Standard Commands
• CALCulate[1|2]:GDAPerture:SPAN
• CALCulate[1|2]:LIMit:STATe
• CALCulate[1|2]:LIMit:STATe?
• CALCulate[1|2]:MATH[:EXPRession]
• CALCulate[1|2]:MATH[:EXPRession]?
• CALibration:ZERO:AUTO
• CALibration:ZERO:AUTO?
• DISPlay:CMAP:COLor[1|2|…16]:HSL
• DISPlay:CMAP:COLor[1|2|…16]:HSL?
• DISPlay:CMAP:COLor[1|2|…16]:RGB
• DISPlay:CMAP:COLor[1|2|…16]:RGB?
• DISPlay:CMAP:DEFault
• DISPlay:MENU[1|2]:KEY[1|2|…7]?
• DISPlay:WINDow[1|2|10]:GEOMetry:LLEFT?
• DISPlay:WINDow[1|2|10]:GEOMetry:SIZE?
• DISPlay:WINDow[1|2|10]:GEOMetry:URIGHT?
• DISPlay:WINDow[1|2|10]:GRAPhics:CLEar
• DISPlay:WINDow[1|2|10]:GRAPhics:COLor
• DISPlay:WINDow[1|2|10]:GRAPhics:COLor?
• DISPlay:WINDow[1|2|10]:GRAPhics[:DRAW]
• DISPlay:WINDow[1|2|10]:GRAPhics:LABel
• DISPlay:WINDow[1|2|10]:GRAPhics:MOVE
• DISPlay:WINDow[1|2|10]:GRAPhics:MOVE?
• DISPlay:WINDow[1|2|10]:GRAPhics:STATe?
• DISPlay:WINDow[1|2]:TRACe:GRATicule:GRID[:STATe]
• DISPlay:WINDow[1|2]:TRACe:GRATicule:GRID[:STATe]?
• DISPlay:WINDow[1|2]:TRACe[1|2][:STATe]
• DISPlay:WINDow[1|2]:TRACe[1|2][:STATe]?
12-4 Programmer’s Guide
• DISPlay:WINDow[1|2]:TRACe:Y[:SCALe]:AUTO
• DISPlay:WINDow[1|2]:TRACe:Y[:SCALe]:PDIVision
• DISPlay:WINDow[1|2]:TRACe:Y[:SCALe]:PDIVision?
• DISPlay:WINDow[1|2]:TRACe:Y[:SCALe]:RLEVel
• DISPlay:WINDow[1|2]:TRACe:Y[:SCALe]:RLEVel?
• DISPlay:WINDow[1|2]:TRACe:Y[:SCALe]:RPOSition
• DISPlay:WINDow[1|2]:TRACe:Y[:SCALe]:RPOSition?
• FORMat:BORDer
• FORMat:BORDer?
• FORMat[:DATA]
• FORMat[:DATA]?
• HCOPy:ABORt
• HCOPy:DEVice[1|2|3]:COLor
• HCOPy:DEVice[1|2|3]:COLor?
• HCOPy:DEVice[1|2|3]:LANGuage
• HCOPy:DEVice[1|2|3]:LANGuage?
• HCOPy:DEVice[1|2|3]:MODE
• HCOPy:DEVice[1|2|3]:MODE?
• HCOPy:DEVice[1|2|3]:RESolution
• HCOPy:DEVice[1|2|3]:RESolution?
• HCOPy[:IMMediate]
• HCOPy:ITEM:ANNotation:STATe
• HCOPy:ITEM:ANNotation:STATe?
• HCOPy:ITEM[1|2|3]:FFEed:STATe
• HCOPy:ITEM[1|2|3]:FFEed:STATe?
• INITiate[1|2]:CONTinuous
• INITiate[1|2]:CONTinuous?
• INITiate[1|2][:IMMediate]
Programmer’s Guide
SCPI Conformance Information
SCPI Standard Commands
12-5
SCPI Conformance Information
SCPI Standard Commands
• MMEMory:CATalog?
• MMEMory:CDIRectory
• MMEMory:CDIRectory?
• MMEMory:COPY
• MMEMory:DELete
• MMEMory:FILE:INFO?
• MMEMory:INITialize
• MMEMory:LOAD:STATe
• MMEMory:MOVE
• MMEMory:MSIS
• MMEMory:MSIS?
• MMEMory:STORe:STATe
• MMEMory:STORe:TRACe
• MMEMory:TRANsfer:BDAT
• MMEMory:TRANsfer[:HFS]
• OUTPut[:STATe]
• OUTPut[:STATe]?
• PROGram:CATalog?
• PROGram[:SELected]:DEFine
• PROGram[:SELected]:DEFine?
• PROGram[:SELected]:DELete:ALL
• PROGram[:SELected]:DELete[:SELected]
• PROGram[:SELected]:EXECute
• PROGram[:SELected]:MALLocate
• PROGram[:SELected]:MALLocate?
• PROGram[:SELected]:NAME
• PROGram[:SELected]:NAME?
• PROGram[:SELected]:NUMBer
12-6 Programmer’s Guide
• PROGram[:SELected]:NUMBer?
• PROGram[:SELected]:STATe
• PROGram[:SELected]:STATe?
• PROGram[:SELected]:STRing
• PROGram[:SELected]:STRing?
• PROGram[:SELected]:WAIT
• PROGram[:SELected]:WAIT?
• SENSe[1|2]:AVERage:COUNt
• SENSe[1|2]:AVERage:COUNt?
• SENSe[1|2]:AVERage[:STATe]
• SENSe[1|2]:AVERage[:STATe]?
• SENSe[1|2]:BWIDth[:RESolution]
• SENSe[1|2]:BWIDth[:RESolution]?
• SENSe[1|2]:CORRection:COLLect[:ACQuire]
• SENSe[1|2]:CORRection:COLLect:METHod
• SENSe[1|2]:CORRection:COLLect:SAVE
• SENSe[1|2]:CORRection:CSET[:SELect]
• SENSe[1|2]:CORRection:CSET[:SELect]?
• SENSe[1|2]:CORRection:EDELay:TIME
• SENSe[1|2]:CORRection:IMPedance:INPut:MAGNitude
• SENSe[1|2]:CORRection:OFFSet:PHASe
• SENSe[1|2]:CORRection:RVELocity:COAX
• SENSe[1|2]:CORRection[:STATe]
• SENSe[1|2]:CORRection[:STATe]?
• SENSe[1|2]:DETector[:FUNCTION]
• SENSe[1|2]:FREQuency:CENTer
• SENSe[1|2]:FREQuency:CENTer?
• SENSe[1|2]:FREQuency:SPAN
Programmer’s Guide
SCPI Conformance Information
SCPI Standard Commands
12-7
SCPI Conformance Information
SCPI Standard Commands
• SENSe[1|2]:FREQuency:SPAN?
• SENSe[1|2]:FREQuency:STARt
• SENSe[1|2]:FREQuency:STARt?
• SENSe[1|2]:FREQuency:STOP
• SENSe[1|2]:FREQuency:STOP?
• SENSe[1|2]:FUNCtion
• SENSe[1|2]:FUNCtion?
• SENSe:ROSCillator:SOURce
• SENSe:ROSCillator:SOURce?
• SENSe[1|2]:SWEep:POINts
• SENSe[1|2]:SWEep:POINts?
• SENSe[1|2]:SWEep:TIME
• SENSe[1|2]:SWEep:TIME?
• SENSe[1|2]:SWEep:TIME:AUTO
• SENSe[1|2]:SWEep:TIME:AUTO?
• SOURce[1|2]:POWer[:LEVel][:IMMediate][:AMPLitude]
• SOURce[1|2]:POWer[:LEVel][:IMMediate][:AMPLitude]?
• SOURce[1|2]:POWer:RANGe
• SOURce[1|2]:POWer:STARt
• SOURce[1|2]:POWer:STOP
• STATus:OPERation:CONDition?
• STATus:OPERation:ENABle
• STATus:OPERation:ENABle?
• STATus:OPERation[:EVENt]?
• STATus:OPERation:NTRansition
• STATus:OPERation:NTRansition?
• STATus:OPERation:PTRansition
• STATus:OPERation:PTRansition?
12-8 Programmer’s Guide
• STATus:QUEStionable:CONDition?
• STATus:QUEStionable:ENABle
• STATus:QUEStionable:ENABle?
• STATus:QUEStionable[:EVENt]?
• STATus:QUEStionable:NTRansition
• STATus:QUEStionable:NTRansition?
• STATus:QUEStionable:PTRansition
• STATus:QUEStionable:PTRansition?
• SYSTem:BEEPer[:IMMediate]?
• SYSTem:BEEPer:VOLume
• SYSTem:BEEPer:VOLume?
• SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
• SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
• SYSTem:COMMunicate:SERial:TRANsmit:BAUD
• SYSTem:COMMunicate:SERial:TRANsmit:BAUD?
• SYSTem:DATE
• SYSTem:DATE?
• SYSTem:ERRor?
• SYSTem:KEY[:VALue]?
• SYSTem:PRESet
• SYSTem:SET
• SYSTem:SET:LRN?
• SYSTem:TIME
• SYSTem:TIME?
• SYSTem:VERSion?
• TRACe[:DATA]
• TRACe[:DATA]?
• TRIGger[:SEQuence]:SOURce
• TRIGger[:SEQuence]:SOURce?
Programmer’s Guide
SCPI Conformance Information
SCPI Standard Commands
12-9
advertisement
Key Features
- Frequency range: 9 kHz to 1.8 GHz
- Dynamic range: >120 dB
- Sweep speed: up to 200 sweeps/s
- Multiple measurement modes: scalar, vector, and time domain
- Built-in signal generator and power meter
- GPIB and LAN interfaces for remote control and data transfer
Related manuals
Frequently Answers and Questions
What is the frequency range of the 8712ES?
What is the dynamic range of the 8712ES?
What is the sweep speed of the 8712ES?
What measurement modes does the 8712ES support?
Does the 8712ES have a built-in signal generator?
Does the 8712ES have a built-in power meter?
What interfaces does the 8712ES have?
advertisement
Table of contents
- 12 Introduction to GPIB Programming
- 14 Bus Structure
- 14 Data Bus
- 14 Handshake Lines
- 15 Control Lines
- 16 Sending Commands
- 17 GPIB Requirements
- 18 Interface Capabilities
- 19 Programming Fundamentals
- 19 Controller Capabilities
- 20 Response to Bus Management Commands
- 23 Message Exchange
- 28 Synchronizing the Analyzer and a Controller
- 29 Overlapped Commands
- 32 Controlling Execution of Overlapped Commands
- 34 Using *WAI and *OPC?
- 37 Passing Control
- 40 Data Types and Encoding
- 41 Data Types
- 41 Numeric Data
- 41 Character Data
- 42 String Data
- 42 Expression Data
- 42 Block Data
- 44 Data Encoding for Large Data Transfers
- 45 ASCII Encoding
- 45 Binary Encoding
- 45 Byte Swapping
- 47 Using Status Registers
- 48 General Status Register Model
- 49 Condition Register
- 49 Transition Registers
- 49 Event Register
- 50 Enable Register
- 51 How to Use Registers
- 52 The Service Request Process
- 53 Generating a Service Request
- 55 The Analyzer's Status Register Sets
- 57 Status Byte
- 60 Device Status Register Set
- 61 Limit Fail Register Set
- 63 Questionable Status Register Set
- 64 Standard Event Status Register Set
- 67 Measuring Status Register Set
- 67 Averaging Status Register Set
- 68 Operational Status Register Set
- 69 Settings for STATus:PRESet
- 70 Analyzer Register Set Summary
- 72 Trace Data Transfers
- 73 Querying the Measurement Trace Using BASIC
- 74 Smith Chart and Polar Formats
- 75 Querying the Measurement Trace Using SICL
- 76 Using Binary Data Encoding
- 78 Trace Data Transfer Sizes
- 80 Transferring Data with IBASIC
- 81 Taking Sweeps
- 82 CALC:DATA? versus TRACE:DATA?
- 83 Querying Single Data Points Using Markers
- 84 Accessing Other Measurement Arrays
- 86 Applying Gain Correction Using the Memory Trace
- 88 Performing Your Own Data Processing
- 90 Downloading Trace Data Using Binary Encoding
- 91 Internal Measurement Arrays
- 91 Raw Data Arrays
- 92 Ratio Calculations
- 92 Error Correction
- 93 Error Coefficient Arrays
- 95 Averaging
- 95 Corrected Data Arrays
- 95 Corrected Memory Arrays
- 96 Trace Math Operation
- 96 Electrical Delay
- 96 Transform (Option 100 only)
- 96 Formatting
- 96 Formatted Arrays
- 97 Offset and Scale
- 100 Introduction
- 102 Window Geometry
- 104 The Graphics Buffer
- 106 Front Panel Keycodes
- 106 Controlling the Front Panel
- 106 Monitoring the Front Panel
- 112 Introduction to SCPI
- 113 The Command Tree
- 117 Sending Multiple Commands
- 118 Command Abbreviation
- 119 Implied Mnemonics
- 120 Parameter Types
- 120 Numeric Parameters
- 121 Character Parameters
- 122 Boolean Parameters
- 123 String Parameters
- 123 Block Parameters
- 124 Syntax Summary
- 126 IEEE 488.2 Common Commands
- 132 How to Enter Numbers and Characters
- 133 How to Enter Frequency Values
- 134 How to Enter Time Values
- 135 How to Enter Power and Voltage Values
- 136 How to Enter Text
- 137 Menu Map for 8712ET/ES and 8714ET/ES
- 200 Queries, Forms, and Parameter Types
- 201 Parameter Types
- 202 SCPI Device Command Summary
- 269 SCPI Conformance Information
- 270 SCPI Standard Commands
- 277 Instrument Specific Commands
- 291 SCPI Error Messages
- 292 Command Errors
- 297 Execution Errors
- 304 Device-Specific Errors
- 306 Query Errors