How to Update P-touch Software

Updating the Firmware

Important

• The printer driver must be installed before updating the firmware.

• Do not turn off the power when transferring data or updating firmware.

• If another application is running, exit the application.

a Turn on the P-touch labeling system and connect the USB cable.

b Start the P-touch Update Software.

 For Windows 7 :

Double-click the [ P-touch Update Software ] icon.

Note

The following method can also be used to start P-touch Update Software:

Click the Start button, and then select [ All Programs ] - [ Brother P-touch ] - [ P-touch Update Software ].

 For Windows 8.1 / Windows Server 2012 / Windows Server 2012 R2 :

Click [ P-touch Update Software ] on the [ Apps ] screen or double-click [ P-touch Update Software ] on the desktop.

 For Windows 10 :

From the Start button, select [ All apps ] and click [ Brother P-touch ] - [ P-touch Update Software ], or double-click [ P-touch Update Software ] on the desktop.

14

14

165

How to Update P-touch Software c Click the [ Machine update ] icon.

d Select the [ Printer ] settings, ensure that [ The machine is connected correctly.

] appears, and then click [ OK ].

166

14

How to Update P-touch Software e Select the [ Language ] settings, select the check box next to the firmware you want to update to, and then click [ Transfer ].

Important

Do not turn off the P-touch labeling system or disconnect the cable during data transfer.

f Check the content to be updated, and then click [ Start ] to begin the update.

The firmware update begins.

Important

Do not turn off the P-touch labeling system or disconnect the cable during the update process.

14

167

Section III

Application for Mac

Using P-touch Software

How to Use P-touch Editor

How to Update P-touch Software

169

170

173

III