advertisement
▼
Scroll to page 2
of
180
9 OS Update
9.1 Updating the Bus Node OS
Introduction
Contents
This chapter describes how to carry out an OS update of the bus node
JX3-BN-ETH. There are several options to transfer the OS file to the bus node:
from within the programming tool JetSym (using Hardware-Manager)
via FTP connection
Topic Page
Operating System Update from within JetSym ........................................... 159
Operating System Update via FTP ............................................................. 160
158 Jetter AG
advertisement
Related manuals
advertisement
Table of contents
- 9 Basic Safety Instructions
- 11 Instructions on EMI
- 13 Product Description JX3-BN-ETH
- 14 Order Reference
- 15 Minimum Requirements
- 16 Parts and Interfaces
- 17 Physical Dimensions
- 19 Identification by Means of the Nameplate
- 20 Nameplate
- 21 Electronic Data Sheet EDS
- 22 EDS File "eds.ini
- 25 EDS Registers
- 27 Version Registers
- 28 Hardware Revisions
- 29 Software Versions
- 33 Interfaces
- 34 Power Supply Terminal X
- 35 Ethernet Interface - Terminals X14, X
- 37 Indicators and LEDs
- 38 LEDs of the Bus Node
- 40 LEDs of the Bus Node During Boot Process
- 41 Status LEDs of the Ethernet Interface
- 42 Installing, Removing and Replacing Modules
- 43 Installing the Bus Node JX3-BN-ETH on a DIN Rail
- 44 Replacing the Bus Node
- 46 Removing the Bus Node JX3-BN-ETH from the DIN Rail
- 47 IP Configuration
- 48 As-Delivered Condition
- 49 Configuration Memory
- 50 Configuration File config.ini
- 54 Configuration Registers
- 55 Modifying the IP Address of the Bus Node
- 56 Setting the Default IP Address
- 57 Setting the IP Address via "config.ini" File
- 58 Setting the IP Address via "config.ini" File and DIP Switch
- 60 Setting the IP Address During Runtime
- 61 Using Names for IP Address
- 65 Initial Commissioning
- 66 Preparations for Hardware Commissioning
- 68 Commissioning in JetSym
- 73 Numbering Registers and I/Os for a JX3-BN-ETH
- 74 Abbreviations, Module Register Properties and Formats
- 75 Registers, Module Registers and I/O Numbers
- 77 Registers and I/O Numbers of JX3 Modules Connected to a JX3-BN-ETH
- 79 Registers and I/O Numbers of JX3 Modules from the JX3-BN-ETH Perspective
- 80 Memory Overview
- 81 File System Memory
- 82 Operating System Memory
- 83 Special Registers
- 84 Inputs and Outputs
- 85 Jetter Ethernet System Bus
- 86 Configuring the Jetter Ethernet System Bus
- 88 Hardware Manager
- 89 Adding Modules
- 94 Publish/Subscribe
- 100 Default Variables
- 102 Access to JX3-BN-ETH Module Registers
- 105 NetCopy
- 109 Properties
- 110 Flash Disk - Properties
- 111 User Administration
- 115 As Delivered Condition / Predefined Users and Keys
- 116 Assigning a Lock
- 118 Assigning Names to Locks/Keys
- 119 Reviewing the Flash Disk Capacity Used
- 120 Flash Disk Capacity Used
- 123 Operating System Update and Application Program
- 124 Formatting and Checking
- 125 Formatting the Flash Disk
- 127 Login
- 128 Supported Commands
- 129 Example: Windows FTP Client
- 131 Engineering a JX3 Station
- 132 Engineering of a JX3 Station Equipped With JX3-BN-ETH
- 133 Product Description - JX3-DI
- 134 Product Description - JX3-DIO
- 135 Product Description - JX3-DO
- 136 Product Description - JX3-CNT
- 137 Product description - JX3-AI
- 138 Product Description - JX3-MIX
- 144 Product Description - JX3-AO
- 145 Product Description - JX3-THI2-RTD
- 146 Product Description - JX3-THI2-TC
- 147 Product Description - JX3-DMS
- 148 Product Description - JX3-PS
- 149 Limitations to be Taken into Account when Engineering a JX3 Station
- 150 Power Consumption Limitations
- 153 Limitations As To Data Exchange
- 157 Updating the Bus Node OS
- 158 Operating System Update from within JetSym
- 159 Operating System Update via FTP
- 160 OS Update of a Module
- 161 Operating System Update of Modules from within JetSym
- 162 Operating System Update of Modules via FTP
- 169 Technical Data
- 170 Technical Specifications
- 171 Physical Dimensions
- 172 Operating Parameters: Environment and Mechanics
- 173 Operating Parameters: Enclosure
- 174 DC Power Supply Inputs and Outputs
- 175 Shielded Data and I/O Lines
- 176 Index