Safety Instructions. AVM FRITZ!Box 6890 LTE v1, FRITZ!Box 6890 LTE


Add to my manuals
304 Pages

advertisement

Safety Instructions. AVM FRITZ!Box 6890 LTE v1, FRITZ!Box 6890 LTE | Manualzz

General Information on the FRITZ!Box

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Safety Instructions

Overview

Before connecting the FRITZ!Box, observe the following security instructions in order to protect yourself, the surroundings, and the

FRITZ!Box from harm.

Fires and Electrical Shocks

Overloaded outlets, extension cords and power strips can cause fires or electric shocks.

• Avoid using socket strips and extension cords if at all possible.

• Do not connect multiple extension cords or socket strips to each other.

Overheating

Heat accumulation can cause the FRITZ!Box to overheat. This can result in damage to the FRITZ!Box.

• Provide for sufficient air circulation around the FRITZ!Box.

• Make sure that the ventilation slits on the FRITZ!Box housing are always unobstructed.

• The FRITZ!Box should not be placed on carpets or upholstery.

• Do not cover the FRITZ!Box.

Damage to Heat-Sensitive Surfaces

The base of the FRITZ!Box heats up during normal operation. This heat can cause damage to heat-sensitive surfaces.

• Do not place the FRITZ!Box on overly heat-sensitive surfaces.

Power Surges Caused by Lightning

During electrical storms, electrical surges caused by lightning present a danger to connected electrical devices.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

FRITZ!Box 6890 LTE 9

General Information on the FRITZ!Box

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Do not install the FRITZ!Box during an electrical storm.

• During a storm, disconnect the FRITZ!Box from the power supply.

• During a storm, disconnect the FRITZ!Box from the DSL or VDSL line.

Moisture, Liquids and Vapors

Moisture, liquids and vapors that find their way into the FRITZ!Box can cause electric shocks or short circuits.

• Only use the FRITZ!Box indoors.

• Never let liquids get inside the FRITZ!Box.

• Protect the FRITZ!Box from vapors and moisture.

Improper Cleaning

Improper cleaning with strong detergents, solvents or wet cloths can cause damage to the FRITZ!Box.

• Please refer to the information about how to clean your FRITZ!Box,

see page 15

.

Improper Opening and Repairs

The device contains hazardous components and should only be opened by authorized repair technicians.

• Do not open the FRITZ!Box housing.

• If the FRITZ!Box needs to be repaired, please take it to a specialized vendor.

Internet Security

Comprehensive information about how to protect your FRITZ!Box and your home network from access by strangers is presented in the internet at: en.avm.de/guide

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

FRITZ!Box 6890 LTE 10

General Information on the FRITZ!Box

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Radio and Electromagnetic Interference

Radio interference can be generated by every device that emits electromagnetic signals. With so many devices transmitting and receiving radio waves, interference can occur when radio waves overlap.

• Do not use the FRITZ!Box in places where the use of radio devices is prohibited.

• Follow any instructions to switch off radio devices – especially in hospitals, outpatient treatment centers, medical practices and other medical facilities – in order to prevent interference with sensitive medical equipment.

• Consult your doctor and the manufacturer of your medical device

(pacemaker, hearing aid, electronically controlled implant, etc.) to find out whether it could be affected by interference from your

FRITZ!Box.

• If applicable, maintain the recommended minimum distance of

15 cm recommended by the manufacturers of medical devices in order to prevent malfunctions of your medical device.

Potentially Explosive Environments

Under unfavorable conditions, radio waves in the vicinity of explosive environments can cause fires or explosions.

• Do not install and operate your FRITZ!Box in the vicinity of explosive environments, flammable gases, areas in which the air contains chemicals or particles like grain, dust or metal powder, or in the vicinity of detonation grounds.

• In locations with potentially explosive atmospheres, and in the vicinity of detonation grounds, follow the instructions to switch off electronic devices in order to prevent interference with detonation and ignition systems.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

FRITZ!Box 6890 LTE 11

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Tabletop router Black, Red, White
  • Dual-band (2.4 GHz / 5 GHz) Wi-Fi 5 (802.11ac) 1733 Mbit/s
  • Gigabit Ethernet
  • Ethernet WAN DSL WAN SIM card slot
  • Ethernet LAN (RJ-45) ports: 5
  • USB port
  • Web-based management

Related manuals

Frequently Answers and Questions

How do I connect the FRITZ!Box 6890 LTE to the internet?
You can connect the FRITZ!Box 6890 LTE to the internet using either a DSL or LTE connection. To connect using DSL, you will need a DSL modem and a DSL line. To connect using LTE, you will need a SIM card from a mobile network provider.
How do I configure the FRITZ!Box 6890 LTE?
You can configure the FRITZ!Box 6890 LTE using the web interface. To access the web interface, open a web browser and enter the IP address of the FRITZ!Box in the address bar. The default IP address is 192.168.178.1.
How do I connect my devices to the FRITZ!Box 6890 LTE?
You can connect your devices to the FRITZ!Box 6890 LTE using either a wired or wireless connection. To connect using a wired connection, use an Ethernet cable to connect your device to one of the LAN ports on the FRITZ!Box. To connect using a wireless connection, select the Wi-Fi network name (SSID) and enter the password.

advertisement

Table of contents