James S.
How to manually raise the roller shutter using the TC42?
To manually raise the roller shutter, ensure the slider is set to manual mode and use the UP button. Make sure limit stops are correctly set for desired positioning.
Initial operation. Becker Centronic TimeControl TC42
Becker Centronic TimeControl TC42 is a timer perfect for automating tasks based on time. It can be used to control lighting, heating, and other electrical devices. It features a large, easy-to-read display, and it can be programmed for up to 100 different on/off events. The TimeControl TC42 is also battery-powered, so it will continue to operate even in the event of a power outage.
Advertisement
Advertisement
Advertisement
Key features
100 programmable on/off events
Large, easy-to-read backlit display
Automatic daylight saving time adjustment
Battery-powered for continuous operation
Compact design for easy installation
Frequently asked questions
The TimeControl TC42 is used to automate tasks based on time. It can be used to control lighting, heating, and other electrical devices.
The TimeControl TC42 can be programmed for up to 100 different on/off events.
Yes, the TimeControl TC42 is battery-powered, so it will continue to operate even in the event of a power outage.
User questions
Patricia Q.
How is the end limit position of the roller shutter adjusted?
To adjust the end position, navigate to the SETTING menu, select the PROG END LIMIT option, and confirm by pressing the OK button.
John J.
What should be checked if the roller shutters do not close automatically in Astro mode?
Verify that no blocking time is preventing closure, ensure the downward time is not disabled ('--:--'), and check that location/date settings are correct. If issues persist, reset the device or switch the program mode from 'ASTRO EVENING' to 'SEPARATE' to use fixed switching times.