advertisement
Step2
Step3
Step 4
Step5
Fig. 2-1
Installation of 2U Frame of 6800N Series
Locate the position for back connector and insert the back connector
Fasten the screw to fix the back connector.
Locate the slot for module.
Get the module installed in the slot, push the module slightly along the slot, press module again to confirm that the module is installed firmly and then close swivel handle.
Install the front panel.
Signal Connections
All signal connections shall be made through the general bus of 6800N Series frame
Module Removal
Follow the following steps to remove VDA6800N module:
1.
Open the front panel
2.
Open the swivel handle to the full.
DEC/DES6800 CVBS/SDI Converter - 7 -
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Converts composite and analog video to SDI output.
- Supports NTSC and PAL input formats.
- AGC/ACC and progressive VBI processing for enhanced video quality.
- Built-in synchronizer for stable operation with unstable input signals.
- Compact design for easy integration into existing systems.
- User-friendly front panel controls for convenient operation.
- Status LED indicators for quick troubleshooting.
- Wide range of applications, including broadcasting, video production, and surveillance.
Related manuals
Frequently Answers and Questions
What types of input signals does the DEC6800N support?
Can the DEC6800N handle noisy input signals?
What is the output format of the DEC6800N?
How do I control the DEC6800N?
What status indicators are available on the DEC6800N?
advertisement