- Computers & electronics
- Audio & home theatre
- Remote controls
- RCA
- RCU600M - Universal Remote Control
- User manual
Code Retrieval. RCA RCU600M - Universal Remote Control
Add to My manuals16 Pages
RCA RCU600M - Universal Remote Control takes control of your home theater equipment with its ability to operate up to 6 devices, including TVs, VCRs, DVD/CD systems, satellite receivers, cable boxes, and audio systems. It features dedicated keys for each component, simplifying operation, and a large, backlit keypad for easy navigation even in low-light conditions. The remote also offers advanced functions like sleep timer, on-screen menu access, and code search capabilities for easy programming.
advertisement
RCU600M_IB_resized.qxd 3/24/04 4:10 AM Page 11
Code Retrieval
If you used one of the Code Search methods to program your remote, follow the steps below to find out which code is compatible with your component.
Finding the actual code and writing it down will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries).
1. Press and hold the CODE SEARCH until the indicator light illuminates.
key
Then release the CODE SEARCH key.
CODE
SEARCH
INDICATOR
LIGHT
2. Press and release the component key that matches the component’s code you are retrieving ( TV, VCR, DVD,
DBS•SAT, CABLE, AUDIO ). The indicator light blinks once and then remains lit.
(BLINK)
3. Press and release the CODE SEARCH key. The indicator light turns off.
4. Starting with 0 on the keypad, press the number keys in order (0-9) until the indicator light blinks.
5. The number that causes the indicator light to blink is the first digit of your code.
6. Repeat step 4 until you have retrieved all three numbers of the code.
7. Refer to the code box to write down the code for your component within the
Direct Entry section (page 5-9) for the component just programmed.
CODE
SEARCH
(OFF)
Sleep Feature
The Sleep feature turns off your TV automatically at a duration you choose from 1 to 99 minutes. To program your remote to control the Sleep feature, follow these steps:
Programming the Sleep Timer
1. Press and hold the SLEEP key until the indicator light illuminates. Release the
SLEEP key.
2. Enter time in minutes using the numerical keypad. The indicator light should turn off. (Minute 1 thru 9: press
0 before the actual number. Maximum:
99 minutes).
3. Leave remote aimed at television.
( IMPORTANT : The Sleep feature will not work unless remote is left aimed at television.)
SLEEP
INDICATOR
LIGHT
Canceling the Sleep Timer
The Sleep Timer program can be cancelled and reset to zero by either of the following:
1. Press and hold the SLEEP key until the indicator light blinks.
OR
2. Press the ON•OFF key, turning the
TV off.
SLEEP
(BLINK)
ON•OFF
11
advertisement
Related manuals
advertisement
Table of contents
- 2 Product Diagram
- 3 Introduction
- 3 Battery Information and Installation
- 3 Key Descriptions
- 4 Primary Key Descriptions for VIDEO Operations
- 5 Secondary Key Descriptions for AUDIO Operations
- 5 Program for TV—Direct Entry Method
- 6 Program for VCR—Direct Entry Method
- 7 Program for DVD/CD Systems—Direct Entry Method
- 7 Program for SATELLITE—Direct Entry Method
- 8 Program for CABLE BOX—Direct Entry Method
- 9 Program for AUDIO Systems—Direct Entry Method
- 9 Operating AUDIO System Functions
- 10 Code Search Methods
- 10 Manual Code Search
- 10 Auto Code Search
- 11 Code Retrieval
- 11 Sleep Feature
- 11 Programming the Sleep Timer
- 11 Canceling the Sleep Timer
- 12 On-screen Menus
- 12 Accessing a Menu System
- 12 Highlighting and Selecting Menu Items
- 12 Exiting a Menu System
- 14 Troubleshooting
- 15 Limited 90-Day Warranty