Server Blade CMOS Backup/Restore. Fujitsu Management Blade S1

Management Agent Telnet Interface

3.3.11 Server Blade CMOS Backup/Restore

I

This Function supports S1 and S2 server blades only.

This option is used to backup and restore server blade BIOS parameters. The server blade must be powered on before backup/restore processing. If the backup is successful, the backup file will be displayed in the CMOS backup file table.

After selecting the server blade whose BIOS is to be backed up or whose backup file is to be restored, the Server

CMOS Configure option is displayed:

Figure 16: Server CMOS Configure menu

The following parameters are displayed:

Parameter

CMOS Control

Description

Specifies the backup/restore policy: backup

The BIOS parameters of the selected server blade are backed up.

smart-restore

After the slot id, BIOS version and MAC address have been verified, the backup file of the selected server blade is restored.

force-restore

The backup file is restored without verification.

CMOS Configure Restore Target Specifies the server blade whose BIOS parameters are to be restored.

Server CMOS ID With BIOS Version Displays the CMOS ID with BIOS version.

Server CMOS ID With Mac Address Displays the CMOS ID with MAC address

Backup Date Time Displays date and time of the backup file generation.

34 ServerView BX400 Management Blade