Introduction. Moxee K779HSDL

Below you will find brief information for K779HSDL mobile hotspot. This manual guides users through the essential steps of setting up their device, including SIM card and battery installation, connecting to Wi-Fi, and navigating the WebUI for advanced configurations. It covers managing internet connections, Wi-Fi settings, network parameters like DHCP, security features such as Firewall and IP Filtering, and device management options like PIN management and firmware upgrades. Troubleshooting tips and important health and safety information are also provided.

PDF

Document

Hello! I've thoroughly reviewed the user manual for the Moxee K779HSDL Mobile Hotspot. This document covers everything from hardware installation, including SIM card and battery setup, to detailed device configuration via its WebUI. You'll find guidance on managing your internet connection, Wi-Fi settings, network security with features like Firewall and MAC filtering, and even troubleshooting common issues. I'm ready to assist you and answer any questions you might have about your device and its functionalities.

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Dual-band Wi-Fi support (2.4GHz & 5GHz)
WPS (Wi-Fi Protected Setup) functionality
WebUI for comprehensive device configuration
Mobile data connection and roaming control
WLAN MAC address filtering (Whitelist/Blacklist)
Built-in Firewall and IP Filter for network security
Port Forwarding and DMZ settings
PIN management for SIM card security
Firmware upgrade capability
LCD display with signal, Wi-Fi, battery, and data flow indicators

Frequently asked questions

First, check if the password you entered is correct. If WPS security is enabled on your PC, ensure the device is expecting a WPS action from your PC.

Possible reasons include an unstable network signal or a hardware problem. Try changing the device's position or location, especially if indoors or near signal-blocking structures. Also, check the hardware for any loose parts or damage. Lastly, log in to the WebUI to review any error messages for specific guidance.

You can find the Wi-Fi Password on the Wi-Fi Info page on the LCD display of your device. Alternatively, you can reset the device to factory defaults by pressing the reset button for 5 seconds.

If the SIM card is locked, you will need to enter a PIN. Log in to the WebUI at http://192.168.1.1 or http://device.WebUI and input the PIN or PUK code you received from your service provider. Be aware that entering the incorrect PIN code 3 times will require a PUK, and 10 incorrect PUK entries will permanently lock the SIM card.