Welcome!. ASUSTeK Computer MSQWIFIG

Add to My manuals
46 Pages

advertisement

Welcome!. ASUSTeK Computer MSQWIFIG | Manualzz

By default, the device automatically adjusts the data rate to maintain an operational wireless transmission. Therefore, a wireless device that is close to the access point may operate at higher speeds while a wireless device far from the access point may operate at lower speeds.

Site survey

A site survey (utility provided with the ASUS WiFi-g™ card) analyzes the installation environment and recommends the best location for wireless

LAN devices and access points.

2.2

Driver and utilities installation

• The contents of the WiFi-g™ support CD are subject to change without notice. Visit the ASUS website for driver/utilities updates.

• If you are using a Windows ® operating system, your computer auto-detects the card during start-up and displays an Add New

Hardware Wizard window. Click Cancel then proceed with the following instructions.

To install the WiFi-g™ card driver and utilities:

1. Place the WiFi-g™ support CD to the optical drive.

2. Click Install ASUS

WLAN Card Utilities/

Driver when the ASUS

WiFi-g™ installation window appears.

2-4

If Autorun is NOT enabled in your computer, browse the contents of the support CD and double click the Setup.exe file to run the CD.

3. Follow screen instructions to install the WiFi-g™ card driver and utilities.

4. When installation is finish, restart your computer.

Chapter 2: Card installation

advertisement

Related manuals

Frequently Answers and Questions

What is the minimum distance required between the device and your body to maintain compliance with the FCC's RF exposure guidelines?
A minimum distance of 20 cm (8 inches) should be maintained between the device and your body.
What type of antenna should be used with this device?
Only the supplied antenna should be used with this device.
What are the potential consequences of using unauthorized antennas, modifications, or attachments?
Using unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.
What safety precautions should be taken when using this device?
The device should be used in such a manner that minimizes the potential for human contact during normal operation.
How can I ensure RF exposure compliance when using this device?
Maintain a certain separation distance between the antenna and nearby persons to ensure RF exposure compliance.