advertisement
Chapter 3 - Home Gateway Utilities
IP Config
Click this item on the menu to reveal a sub menu. Follow the instructions to setup the ASUS SpaceLink Dual-Band
Home Gateway. Tips are given when you move your cursor over each item.
30
Static IP Address
IP Address - Normally, this is Dynamic (because fixed IP accounts cost more) and should be set to Automatic IP. Do not use “Static IP” if your
ISP’s documentation does not mention an IP Address. If your ISP provided an IP Address with instructions to use it, select Static IP from “IP Addressing
Method” and enter the address into the provided field.
WAN DNS Settings
DNS Server - Normally this is automatic and you would answer “NO” to the question about manually assigning DNS. If you are given instructions from your ISP to enter DNS addresses, select “YES” to manually assigning
DNS and enter the IP addresses here. You can set the DNS server anytime using any connection type (Static IP, PPPoE, or Automatic IP).
ASUS SpaceLink 802.11g Access Point
advertisement
Related manuals
advertisement
Table of contents
- 7 1. Introduction
- 7 Overview
- 8 The SpaceLink™ Family
- 10 System Requirements
- 10 The Product Package
- 11 Features
- 12 Wireless Operation
- 13 Roaming Between SpaceLink™ Gateways or APs
- 14 Roaming Guidelines (SpaceLink™ Gateways or APs)
- 15 SpaceLink™ Home Gateway Topology
- 18 LED Indicators
- 19 2. Hardware Installation
- 19 Installation Procedure
- 21 Wired and Wireless Connections
- 23 Configuring the SpaceLink 802.11g AP
- 25 Installing the Homegateway Utilities
- 26 Homegateway Utilities
- 26 Connecting to the SpaceLink Web Manager
- 27 Home Gateway Discovery
- 29 User Name and Password
- 29 Home Page
- 30 Quick Setup
- 31 Wireless
- 35 IP Config
- 37 NAT Setting
- 38 Internet Firewall
- 39 Wireless Firewall
- 40 System Setup
- 41 Status & Log
- 42 Firmware Restoration
- 42 Using a Hub
- 43 Printer Setup Wizard
- 43 Add Printer Wizard
- 45 Printer Setup Wizard
- 46 Verifying Your Printer