advertisement
Chapter 3 - Home Gateway Utilities
Verifying Your Printer
After setting up the printer, a printer icon will appear in Windows’ “Printers and
Faxes”. Right click the printer icon and choose Properties to configure the printer.
If your printer was previously setup, the
SpaceLink 802.11g Access Pointprinter setup wizard will change your printing port from your local LPT1 (parallel) port to
“Remote Port”. If necessary, you can change this back at anytime or use
Windows “Add Printer” to setup another printer on whatever port you require.
When properly setup, the SpaceLink
802.11g Access Pointwill show the printer name in the “Homegateway Discovery” utility and show “on-line” under the “Printer
Server” on the “Status” page of the web manager.
ASUS SpaceLink 802.11g Access Point 41
advertisement
Related manuals
advertisement
Table of contents
- 7 1. Introduction
- 7 Overview
- 8 The SpaceLink™ Family
- 10 System Requirements
- 10 The Product Package
- 11 Features
- 12 Wireless Operation
- 13 Roaming Between SpaceLink™ Gateways or APs
- 14 Roaming Guidelines (SpaceLink™ Gateways or APs)
- 15 SpaceLink™ Home Gateway Topology
- 18 LED Indicators
- 19 2. Hardware Installation
- 19 Installation Procedure
- 21 Wired and Wireless Connections
- 23 Configuring the SpaceLink 802.11g AP
- 25 Installing the Homegateway Utilities
- 26 Homegateway Utilities
- 26 Connecting to the SpaceLink Web Manager
- 27 Home Gateway Discovery
- 29 User Name and Password
- 29 Home Page
- 30 Quick Setup
- 31 Wireless
- 35 IP Config
- 37 NAT Setting
- 38 Internet Firewall
- 39 Wireless Firewall
- 40 System Setup
- 41 Status & Log
- 42 Firmware Restoration
- 42 Using a Hub
- 43 Printer Setup Wizard
- 43 Add Printer Wizard
- 45 Printer Setup Wizard
- 46 Verifying Your Printer