Chapter 2 Installation Procedure

User Manual

2.1 Software Installation

2.1.1 Overview

The Adapter’s Setup Wizard will guide you through the installation procedure for Windows

98SE, Me, 2000 and XP. The Setup Wizard will guide you install the Utility and drivers.

If you install the hardware before the software, you will be prompted “Found New Hardware

Wizard”, click the

Cancel button, and run the Setup Wizard program on the CD-ROM.

The Setup steps for Windows 98SE, Me, 2000 and XP are very similar. The following setup steps are for windows 2000.

2.1.2 Software Installation for Windows 2000

1. Insert the Resource CD into your CD-ROM drive, click the

Start button and choose

Run

.

In the field that appears, enter F:\XXX\Setup.exe (if “F” is the letter of your CD-ROM drive; XXX presents the setup program path, which is labeled on the Resource CD),

Figure

2-1 should then appear.

5

User Manual

Figure 2-1 Preparing Setup

2. You will see a warning box shown in

Figure 2-1, click the

No

button to end the installation.

Otherwise, click the

Yes

button to install driver, the Setup Wizard will display a screen similar to that shown in

Figure 2-2

after a moment.

Figure 2-2 Start Setup

User Guide

3. To continue, please waiting for running automatically for a moment,

Figure 2-2

. Click the

Cancel button to end the Installation.

4. The soft install automatically in the operating system, and appear a dialog box

Figure 2-3

.

Now, only a thing which you can do is Waiting!

6

User Manual

Figure 2-3 waiting state dialog box

5. After the files have been successfully installed, the screen in

Figure 2-4

will appear. Click the

Finish button to finish the wizard.

Figure 2-4 Finish installing

6. After installing the software, Please plug the adapter into your PC. If you need instructions as to how to do this, please refer to next section - Hardware Installation. If you have plugged it into you PC already, please unplug it and plug it back in. The OS will automatically detect the adapter and automatically setup the driver for the adapter. If it does not, please follow the setup steps to finish the driver installation.

After installing the driver successfully, you should see an icon appear in your system icon box.

7