advertisement
2.7 Advanced
User Manual
15
User Manual
Chapter 3 Configuration
CNE 802.11b/g Wireless USB Adapter can be configured by its utility. This section describes how to configure your Wireless USB Adapter for wireless connectivity on your Wireless Local
Area Network (WLAN) and use the data security encryption features.
After the Adapter's driver and utility has been installed, the adapter’s tray icon or will appear in your system tray. It means the utility is running on your system. If the utility does not run, you can run the utility by clicking: Start > Program > RaLink Wireless > RaLink
Wireless Utility . If the icon still does not appear, the driver or utility may be installed incorrectly or the adapter is unplugged, please try again.
Icon means the connection has been established. Icon means there is no connection.
Double-click the icon and the configuration screen of the utility will appear. You can also run the utility by clicking: Start > Program > RaLink Wireless > RaLink Wireless Utility .
The utility provides a complete and easy to use set of tools to:
● Display current status information
● Edit and add configured profiles
● Display current diagnostics information
The section below introduces these above capabilities.
*
Note:
If your OS is Windows XP, you can use Windows XP to configure the wireless network settings. (To use this function, you must upgrade the OS with sp1).
If you want to use Windows XP to configure wireless network settings, just exit the utility.
Right-click the icon at the bottom of the screen, and click
Exit to exit the utility.
16
advertisement
