advertisement
![Administration > Log. Cisco WRT54G, Q87-WRT54GH, WRT54GH | Manualzz Administration > Log. Cisco WRT54G, Q87-WRT54GH, WRT54GH | Manualzz](http://s2.manualzz.com/store/data/063038503_1-6984546fd0a1139083009ebb25c3312c-360x466.png)
Chapter 3
Administration > Log
The Router can keep logs of all traffic for your Internet connection.
Advanced Configuration
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network devices, including connection to the Internet.
Log
Administration > Log
Enabled/Disabled To disable the Log function, select
Disabled . To monitor traffic between the network and the
Internet, keep the default, Enabled . With logging enabled, you can choose to view temporary logs.
View Log To view the logs, click View Log .
Administration > Diagnostics
Diagnostics
Ping Test
Ping checks the status of a connection.
IP or URL Address Enter the address of the computer whose connection you wish to test.
Packet Size Enter the packet size you want to use. The default is 32 bytes.
Number to Ping Enter the number of times you wish to test the connection. The default is 5 .
Start to Ping To run the test, click this button. The Ping screen shows if the test is successful. Click Close to return to the Diagnostics screen.
Log > View Log
Log
• Type Select Incoming Log , Outgoing Log , Security
Log , or DHCP Client Log .
• <Type> Log The Incoming Log displays a temporary log of the source IP addresses and destination port numbers for the incoming Internet traffic. The
Outgoing Log displays a temporary log of the local IP addresses, destination URLs/IP addresses, and service/ port numbers for the outgoing Internet traffic. The
Security log displays the login information for the browser-based utility. The DHCP Client Log displays the LAN DHCP server status information.
Click Save the Log to save this information to a file on your computer’s hard drive. Click Refresh to update the log. Click Clear to clear all the information that is displayed.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Wireless-G Home Router with SpeedBurst
Diagnostics > Ping
Traceroute Test
Traceroute checks the performance of a connection.
IP or URL Address Enter the address of the computer whose connection you wish to test.
19
advertisement
Key Features
- Black, Blue
- 802.11g
- Fast Ethernet
- Ethernet WAN
- Ethernet LAN (RJ-45) ports: 4
Related manuals
advertisement
Table of contents
- 5 Front Panel
- 5 Back Panel
- 5 Side Panel
- 7 General Network Security Guidelines
- 7 Additional Security Tips
- 8 Setup > Basic Setup
- 12 Setup > DDNS
- 13 Setup > MAC Address Clone
- 13 Wireless > Basic Wireless Settings
- 15 Wireless > Wireless MAC Filter
- 15 Wireless > Advanced Wireless Settings
- 16 Security > Firewall
- 17 Security > VPN Passthrough
- 18 Access Restrictions > Internet Access
- 19 Applications and Gaming > Single Port Forwarding
- 20 Applications and Gaming > Port Range Forwarding
- 20 Applications & Gaming > Port Range Triggering
- 21 Applications and Gaming > DMZ
- 22 Administration > Management
- 23 Administration > Log
- 23 Administration > Diagnostics
- 24 Administration > Factory Defaults
- 24 Administration > Firmware Upgrade
- 25 Status > Router
- 25 Status > Local Network
- 26 Status > Wireless Network
- 29 Limited Warranty
- 31 FCC Statement
- 31 FCC Radiation Exposure Statement
- 31 Safety Notices
- 31 Industry Canada Statement
- 32 Avis d’Industrie Canada
- 32 Wireless Disclaimer
- 32 Avis de non-responsabilité concernant les appareils sans fil
- 33 User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE)
- 37 Cisco Products
- 37 Software Licenses