Processing Images. Pentax M 12633, MX-1, 12622
Oglas
Oglas
Processing Images
4
Processing Images with Digital Filters
You can edit captured images using digital filters.
The following filters are available.
Filter name
B&W
Sepia
Toy Camera
Retro
Miniature
Slim
Invert Color
Effect
Processes the image into one that has the look of a black and white photograph.
Processes the image into one that has the look of a sepia photograph.
Processes the image that looks as though it was shot with a toy camera. You can choose the effect level from among Low, Medium, and High.
Processes the image into one that has the look of an old photo. You can choose the color from among Original, Amber, and Blue.
Color
Extract Color
Fish-eye
Brightness
Processes the image using the selected color filter. You can choose from six filters: red, pink, purple, blue, green, and yellow.
Extracts only a specific color and processes the rest of the image into black and white. You can choose from three filters: red, green, and blue.
Color Emphasis There are four filters: Blue, Green, Pink, and Red.
High Contrast Adjusts the contrast of the captured images.
Starburst
Emphasizes a twinkling atmosphere by adding highlight spots to the shining areas in a night scene or on the surface of water.
You can choose the shape of spots from among Cross, Heart, Star,
Musical Note, and Snow.
Soft Processes the image into one that appears soft overall.
Creates an image that looks as though it was shot with a fish-eye lens. You can choose the effect level from among Low, Medium, and High.
Adjusts the brightness of the image.
Blurs part of the image to create a fake miniature scene. You can choose the area(s) to be blurred from among Top, Center, and
Bottom.
Changes the horizontal-to-vertical ratio of a subject.
Reverses the image from positive to negative, or vice versa.
Movies and images taken at F (Digital Panorama) mode, or with another camera cannot be processed using the Digital Filter function.
146
To Apply a Filter
1
Select an image for applying the digital filter in playback mode, and press the four-way controller ( 3 ).
The Playback Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select
D (Digital Filter), and press the 4 button.
When applying a filter to the selected image for the first time
The screen to select a filter in Step 4 appears. Skip Step 3 and proceed to Step 4.
When applying a filter to an image to which a filter has already been applied
Proceed to Step 3.
3
Use the four-way controller ( 23 ) to select [Apply digital filter], and press the 4 button.
The screen to select a filter appears.
4
4
Use the four-way controller
( 2345 ) to select a filter.
After selecting a filter, you can check the effect on the screen.
For a filter for which you can select/adjust parameters, the available parameters are displayed in the lower part of the filter.
Proceed to Step 6 if you do not need to change the parameters.
5
Use the e-dial to adjust the value.
Color Filter Slim Filter
147
4
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Apply additional filter(s)] or [Save as], and press the 4 button.
Select [Apply additional filter(s)] when you want to apply additional filters to the same image. The screen that was displayed in
Step 4 appears again.
Save as
Cancel
If [Save as] was selected, the filter-processed image is saved as a new image.
Up to 20 filters can be combined to the same image.
148
To Recreate Filter Effects
Retrieves the setting of an image with filter effects and apply the same filter effects to other images.
1
Select a filter-processed image in playback mode.
2
Select D (Digital Filter) from the Playback Mode Palette, and press the 4 button.
3
Use the four-way controller ( 23 ) to select [Recreate filter effects], and press the 4 button.
The filter effects used for the selected image appear.
4
To check the parameter details, press the M button and select the filter to be checked with the four-way controller ( 2345 ).
You can check the filter parameters.
Reapplies following digital filter effects from previous image
After checking, press the M button to return to the previous screen.
5
Press the 4 button.
The image selection screen appears.
6
Use the four-way controller ( 45 ) to select an image for applying the same filter effects, and press the
4 button.
You can only select an image that has not been processed with a filter.
The save confirmation screen appears.
7
Press the 4 button.
The filter-processed image is saved as a new image.
To Search for the Original Image
Searches for and displays the original image prior to digital filter application.
1
Select [Find original image] in Step 3 on p.148, and
press the 4 button.
The original image prior to digital filter application is retrieved.
If the original image is no longer stored on the SD Memory Card, the message [Original image, prior to digital filter application, is not found] appears.
4
Using the
p
Filter
Adjusts parts of the image that are too bright or too dark and processes images to simulate an HDR effect.
1
In playback mode, use the four-way controller ( 45 ) to choose the image you want to edit.
149
4
2
Use the four-way controller ( 2345 ) to select p
(HDR Filter) from the Playback Mode Palette.
3
Press the 4 button.
The preview image of the result of the filter effect appears.
4
Press the 4 button.
The save confirmation screen appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation does not appear.
5
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The image processed with the filter is saved.
Creating a Collage Image
Make a collage image by placing captured images on a selected pattern.
1
Use the four-way controller ( 2345 ) to select
(Collage) from the Playback Mode Palette.
2
Press the 4 button.
The item selection screen appears.
3
M
Layout
Backgnd.
Select image(s)
MENU
To Select the Number of Recorded Pixels
3
Use the four-way controller ( 23 ) to choose [Recorded
Pixels].
4
Press the 4 button or the four-way controller ( 5 ).
A pull-down menu appears.
150
5
Use the four-way controller ( 23 ) to choose the recorded pixels.
You can choose h or Q .
Layout
Backgnd.
Select image(s)
3 M
2 M
MENU
6
Press the 3 button.
The setting is saved and the item selection screen reappears.
OK
To Select the Layout Pattern
7
Use the four-way controller ( 23 ) to choose [Layout].
8
Press the 4 button or the fourway controller ( 5 ).
3 M
A pull-down menu appears.
4
MENU OK
9
Use the four-way controller ( 23 ) to choose the pattern of layout.
You can choose from 3 patterns of layout ( 7 / 9 / 8 ).
10
Press the 3 button.
The setting is saved and the item selection screen reappears.
To Select the Background
11
Use the four-way controller ( 23 ) to choose
[Backgnd.].
12
Press the 4 button or the four-way controller ( 5 ).
A pull-down menu appears.
151
13
Use the four-way controller ( 23 ) to choose the background.
You can choose the white background or the black background.
Recorded Pixels
Layout
3 M
MENU
14
Press the 3 button.
The setting is saved and the item selection screen reappears.
OK
4
To Lay Out the Image
• Only images recorded with h or higher in 4:3 or with i or higher in 16:9 can be selected. You cannot select any image of lower sizes.
Movies and images taken with other cameras do not appear as selectable items.
• If you select an image with a 16:9 aspect ratio, the black areas appear above and below the image.
15
Use the four-way controller ( 23 ) to choose [Select image(s)].
16
Press the 4 button or the four-way controller ( 5 ).
The images to be selected appear.
17
Use the four-way controller ( 45 ) to choose the image to be placed, and press the 4 button.
1 0 0 - 0 0 0 1
The selected image is placed in the highlighted area in the guide. The guide appears on the top left of the display.
MENU
OK
18
Repeat Step 17 to lay out the rest images.
19
Press the 3 button.
The camera returns to the item selection screen.
152
To Save the Edited Image
20
Use the four-way controller ( 23 ) to choose [Create an image].
3 M
MENU
21
Press the 4 button.
A confirmation dialog for saving the image appears.
22
Use the four-way controller ( 2 ) to select [Save].
23
Press the 4 button.
The edited image is saved.
The quality level of the image is fixed at “Fine”.
OK
4
Compensating for a Red-eye Effect
You can correct images where the flash has caused the subject to appear with red eyes.
The Red-eye Edit function can only be used with still pictures taken with this camera. The red-eye edit function cannot be used on images taken at F (Digital Panorama) mode, movies, images taken with other cameras and images where red eyes cannot be detected on the camera.
1
In playback mode, use the four-way controller ( 45 ) to choose the image you want to correct.
2
Use the four-way controller ( 2345 ) to select Z (Redeye Edit) from the Playback Mode Palette.
3
Press the 4 button.
The save confirmation screen appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
153
4
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The processed image is saved.
4
Overlaying Your Original Frame on Still Pictures
You can overlay your original frame (decorative frame) on still pictures.
You can select the type and color of an original frame and its position.Text can also be entered.
Frame
Type of original frame
Blur/Edge Composite
Frame Type
Color i (All sides)/ j (Upper and lower sides)/ k (Right and left sides)/ l (Upper side)/ m (Lower side)/ n (Left side)/ o (Right side)
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
Text Stamp
Available characters
A – Z, a – z, 0 – 9, Symbols, Space
Display Position
Color p (Upper-left)/ q (Upper-center)/ r (Upper-right)/ s (Lower-left)/ t (Lower-center)/ u (Lower-right)
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
The Original Frame function cannot be used on images taken in
F (Digital Panorama) mode, images taken with the recorded pixels smaller than f / O or movies. An error message appears in Step 3.
1
Enter playback mode and use the four-way controller
( 45 ) to choose the image to which you want to add a frame.
2
Use the four-way controller ( 2345 ) to select
W (Original Frame) from the Playback Mode Palette.
3
Press the 4 button.
The original frame type selecting screen appears.
154
4
Use the four-way controller ( 23 ) to select an original frame type, and press the 4 button.
The frame setting screen appears.
5
Use the four-way controller ( 23 ) to select [Frame Type], and press the four-way controller ( 5 ).
Color
Text Stamp
6
Use the four-way controller ( 23 ) to select a frame type, and press the four-way controller ( 4 ).
7
Set [Color] in the same way as in Steps 5 and 6.
8
Adjust the position of the frame and image.
For details, refer to “To Adjust the Position of the Frame and an Image”
9
Use the four-way controller ( 23 ) to select [Text Stamp], and press the four-way controller ( 5 ).
The Text Stamp screen appears.
When you do not want to enter characters, proceed to Step 11.
10
Set up the text stamp.
For details, refer to “To Set Up Text Stamp”
AE-L A/a
A B C D E F G H I J K L M N O P Q R
S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
. , ( ) [ ] < > @ - _ / : ; ! ? #
4
Delete One Character
MENU Cancel OK
11
Press the 4 button.
The save confirmation screen appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
155
12
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The edited image is saved.
4
To Adjust the Position of the Frame and an Image
1
Press the d / i button.
The frame position adjustment screen appears.
Four-way controller
( 2345 )
Zoom lever to the right ( 5 )
Zoom lever to the left ( 6 )
Press to adjust the position of the frame.
Press to make the frame larger.
Press to make the frame smaller.
2
Press the d / i button.
The image position adjustment screen appears.
Four-way controller
( 2345 )
Zoom lever to the right ( 5 )
Zoom lever to the left ( 6 )
Press to adjust the position of the image.
Press to make the image larger.
Press to make the image smaller.
3
Press the 4 button.
The screen returns to the previous screen.
//
//
To Set Up Text Stamp
1
Use the four-way controller
( 2345 ) to select a character, and press the 4 button.
The selected character is input.
Up to 52 characters can be input.
AE-L A/a
A B C D E F G H I J K L M N O P Q R
S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
. , ( ) [ ] < > @ - _ / : ; ! ? #
FRIENDS
Delete One Character
MENU Cancel OK
156
A button
Zoom lever to the right ( 5 )
Zoom lever to the left ( 6 ) d / i button
Press to switch between upper and lower case.
Press to move the cursor to the right.
Press to move the cursor to the left.
Press to delete the character.
2
Use the four-way controller ( 2345 ) to select [Finish], and press the 4 button.
3
Use the four-way controller ( 23 ) to select [Display Position], and press the four-way controller ( 5 ).
4
4
Use the four-way controller ( 23 ) to select the display position, and press the 4 button.
5
Use the four-way controller ( 23 ) to select [Color], and press the four-way controller ( 5 ).
6
Use the four-way controller ( 23 ) to select the color, and press the 4 button twice.
To View the Preview Screen
1
Press the d / i button.
The preview screen appears.
157
2
Press the 3 button.
The screen returns to the previous screen.
3
Press the 4 button.
4
Developing
|
Images
You can convert captured RAW images into JPEG images, and save them as a new file.
Only RAW images captured with this camera can be edited. RAW images and JPEG images captured with other cameras cannot be edited on this camera.
To Develop One RAW Image
1
Select a RAW image in playback mode, and press the four-way controller ( 3 ).
The Playback Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select h (RAW Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller ( 23 ) to select [Develop single image], and press the 4 button.
The parameters recorded in the image file appear.
Proceed to Step 6 if you do not need to change the parameters.
158
4
Use the four-way controller ( 23 ) to choose a parameter you want to change.
You can select a different image by turning the e-dial.
The following parameters can be changed.
Parameter
Aspect Ratio
JPEG Recorded Pixels
JPEG Quality
Custom Image
White Balance
Sensitivity
Shadow Correction
Distortion Corr.
Value
D / E / F / G
JPEG recorded pixels corresponding to the aspect ratio
Fine/Normal
Bright/Natural/Vibrant/Reversal Film/
Monochrome
F / G / H / ^ / J D / J N / J W / J L /
I / L / K
-1.0 to +1.0
On/Off
On/Off
Page
—
5
Use the four-way controller ( 45 ) to change the value.
Press the four-way controller ( 5 ) to display the setting screen for
White Balance and Custom Image.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller ( 23 ) to select [Continue] or [Exit], and press the 4 button.
Select [Continue] to edit other images. The screen for selecting the parameter in Step 4 appears again.
4
159
4
To Develop Multiple RAW Images
You can develop multiple RAW images with the same settings.
1
Select [Develop multiple images] in Step 3 on p.158,
and press the 4 button.
The multi-image display screen appears.
Refer to p.125 for details on operations in the multi-image display
screen.
2
Use the four-way controller ( 2345 ) to select the
RAW images to be developed, and press the 4 button.
3
Press the A button.
The development confirmation screen appears.
4
Use the four-way controller ( 23 ) to select [Develop images as shot] or [Develop images with modified settings], and press the 4 button.
To change parameters, select [Develop images with modified settings].
5
Use the four-way controller
( 2345 ) to set [Aspect Ratio],
[JPEG Recorded Pixels] and
[JPEG Quality].
When [Develop images with modified
settings] is selected in Step 4, refer to p.159
to change other parameters.
JPEG Recorded Pixels
JPEG Quality
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The selected RAW images are developed and saved as new images.
160
Editing Movies
You can extract a frame from the recorded movie to save as a still picture, divide a movie into two, or add a title picture to a movie.
1
In playback mode, use the four-way controller ( 45 ) to choose the movie you want to edit.
2
Use the four-way controller ( 2345 ) to select [
(Movie Edit) from the Playback Mode Palette.
3
Press the 4 button.
The movie editing selection screen appears.
Subsequent steps vary depending on your selection.
4
OK
To Save a Frame from a Movie as a Still Picture
4
Select [Save as Still Image] on the movie editing selection screen.
5
Press the 4 button.
The screen for selecting a frame to be saved as a still picture appears.
6
Use the four-way controller
( 2345 ) to choose the frame you want to save.
2 Plays or pauses the movie.
3 Stops the movie and returns to the first frame.
4 Reverses the movie frame by frame
*1
.
5 Forwards the movie frame by frame.
11
0 0 4 2
0 0 : 0 6
*1 Every 30 frame is the first frame for reversing frame. For example, when you reverse frame at 1 to 31, the frame reverses to the first frame and when you reverse frame at 32 to 61, the frame reverses to the 31st frame.
161
7
Press the 4 button.
The selected frame is saved as a still picture.
4
To Divide a Movie
4
Select [Divide Movies] on the movie editing selection screen.
5
Press the 4 button.
The screen for specifying the dividing position appears.
6
Use the four-way controller
( 2345 ) to specify the dividing position.
2 Plays or pauses the movie.
3 Stops the movie and returns to the first frame.
4 Reverses the movie frame by frame.
5 Forwards the movie frame by frame.
7
Press the 4 button.
A confirmation dialog appears.
8
Use the four-way controller ( 23 ) to select [Divide].
162
9
Press the 4 button.
The movie is divided at the specified position, each segment is saved as a new file, and the original movie is deleted.
Protected movies cannot be divided.
• Only a movie of more than 2 seconds (31 frames) can be divided.
• For dividing, every 30 frames (31st, 61st, 91st. frames) can be selected.
To Add a Title Picture to a Movie
4
Select [Adding title picture] on the movie editing selection screen.
5
Press the 4 button.
The screen for selecting a title picture appears.
6
Use the four-way controller ( 45 ) to choose the image for the title picture.
Only images available for the title picture are displayed.
7
Press the 4 button.
The screen for confirming the position of the title picture appears.
8
Use the four-way controller ( 23 ) to select the position.
e Adds the title picture to the beginning of the movie.
f Adds the title picture to the end of the movie.
9
Press the 4 button.
The selected picture is saved as the title picture.
• Protected movies cannot be added a title picture.
• If a movie is more than 26 minutes long after adding title pictures, you cannot add any more title pictures to it.
4
163
• When a title picture is added to the beginning of a movie: When the movie is played back, the title picture is played back for three seconds, and then the movie is played back. The still picture set as title picture is used as the thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is played back, the movie is played back first, then the title picture is played back for three seconds. The thumbnail of the movie is not changed by adding a title picture to the end of the movie.
• A still picture is automatically resized according to the size of the movie.
• Only a still picture with the same aspect ratio as the movie can be set as a title picture.
4
Copying Images
You can copy images from the built-in memory to the SD Memory Card and vice versa. This function can be selected only when an SD Memory
Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
1
Use the four-way controller ( 2345 ) to select p
(Image Copy) from the Playback Mode Palette.
2
Press the 4 button.
The copying method selection screen appears.
Subsequent steps vary depending on your selection.
To Copy Files from the Built-in Memory to the SD Memory Card
All the images in the built-in memory are copied to the SD Memory Card at once. Before copying the images, make sure that there is enough space on the SD Memory Card.
164
3
Use the four-way controller ( 23 ) to select [ 2}{ ].
SD
4
Press the 4 button.
All the images are copied to the SD Memory Card.
To Copy Files from the SD Memory Card to the Built-in Memory
Selected images from the SD Memory Card are copied to the built-in memory one by one.
3
Use the four-way controller ( 23 ) to select [ {}2 ].
4
Press the 4 button.
5
Use the four-way controller ( 45 ) to select the image you want to copy.
4
6
Press the 4 button.
The selected image is copied to the built-in memory.
To copy other images, repeat Steps 3 to 6. Select [Cancel] to exit the copy operation.
When a file is copied from the SD Memory Card to the built-in memory, it is assigned a new file name.
165
Prenesi
Javna povezava posodobljena
Javna povezava do vašega klepeta je bila posodobljena. You may view and manage your chat links after registration here.
Javna povezava do dokumenta
Oglas