When the oven is working. Aeg-Electrolux MCC3880EM

When the oven is working...

EN

Interrupting a cooking cycle Cancelling a cooking cycle

You can stop the cooking process at any time by pressing the Cancel key once or by opening the oven door.

If you wish to cancel the cooking process, press the Cancel key twice.

In both cases:

You will then hear a beep and the time will appear on the display.

•

Microwave emission is stopped

immediately.

End of a cooking cycle

•

The grill is de-activated but is still very hot.

Danger of burning!

At the end of the process you will hear three beeps and the display will show the word “End”.

•

The timer stops and the display shows the remaining amount of operating time.

The beeps are repeated every 30 seconds until the door is opened or the Cancel key is pressed.

If you wish, at this time you can:

1. Turn or stir the food to ensure it will be evenly cooked.

2. Change the process parameters.

3. Cancel the process by pressing the Cancel key.

To restart the process, close the door and press the Start key

Altering parameters

The operating parameters (time, power, temperature) can be altered when the oven is operating or when the cooking process has been interrupted by proceeding as follows:

1. Select the parameter to be change with the

Parameter selection keys. The respective symbol and the display start blinking.

2. Set the desired value with the “+” and “–” keys.

3. Press the Confirmation key or wait 3 seconds to validate the new parameter value. The display and symbols stop blinking.

20