advertisement
System parameters
"Host name" The text displays the title at the top of the main page.
“Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the camera’s operation being noticed.
"Keep current date and time" Click on this to reserve the current date and time of the Network Camera. An internal real-time clock maintains the date and time even when the power of the system is turned off.
"Sync with computer time" Synchronizes the date and time of the Network Camera with the local computer. The read-only date and time of the PC is displayed as updated.
“Manual” Adjust the date and time according to what is entered by the Administrator.
Notice the format in the related fields while doing the entry.
“Automatic” Synchronize with the NTP server over the Internet whenever the
Network Camera starts up. It will fail if the assigned time-server cannot be reached.
“NTP server” Assign the IP address or domain name of the time-server. Leaving the text box blank connects the Network Camera to the default time-servers.
"Time zone" Adjust the time with that of the time-servers for local settings.
“Update interval” Select hourly, daily, weekly, or monthly update with the time on the
NTP server.
Remember to click on to immediately validate the changes. Otherwise, the correct time will not be synchronized.
- 24 - www.vivotek.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Before You Use This Product
- 7 Package Contents
- 8 Installation
- 8 Hardware installation
- 9 Software installation
- 10 Initial Access to the Network Camera
- 10 Check Network Settings
- 10 Add Password to prevent Unauthorized Access
- 11 How to Use
- 11 Authentication
- 12 Installing plug-in
- 13 Primary user’s capability
- 13 Main Screen with Camera View
- 14 Digital Zoom
- 14 Snapshot
- 15 Client settings
- 18 Administrator’s capability
- 18 Fine-tuning for Best Performance
- 21 Opening accounts for new users
- 22 Build a security application
- 23 Software revision upgrade
- 24 Definitions in Configuration
- 25 System parameters
- 26 Security settings
- 27 Network settings
- 27 Network type
- 28 RTSP Streaming
- 30 WLAN Configuration
- 34 Access List
- 35 Audio and Video
- 35 General
- 35 Video Settings
- 35 Video orientation
- 36 Audio settings
- 37 Image Settings
- 38 Email & FTP
- 38 Email
- 40 Motion detection
- 41 Application settings
- 41 Snapshot
- 41 Weekly schedule
- 41 Snapshot file name prefix
- 41 Send out the snapshot while motion detection
- 42 Sequential operation
- 42 Method for sending snapshot
- 45 System log
- 46 Viewing system parameters
- 47 Maintenance
- 48 Appendix
- 48 A. Troubleshooting
- 48 Status LED
- 48 Reset and restore
- 49 B. URL commands of the Network Camera
- 49 Get server parameter values
- 50 Set server parameter values
- 52 Available parameters on the server
- 63 Application page CGI command
- 65 Capture single snapshot
- 66 Account management
- 67 System logs