Installing the software
The procedures for installing the necessary software are explained.
Installing the USB driver (Only for Mac OS 8.6)
z
Turn on your Macintosh.
x
Set the included CD-ROM (S-SW5) in the CD-ROM drive of your Macintosh.
c
Copy the following 2 files to the [Extensions] folder within the System folder.
PENTAX-USB Storage Driver
PENTAX-USB Storage Shim (E) v
Restart your Macintosh.
memo
For MacOS 9.x or later, there is no need to install the USB driver.
Installing ACDSee
TM
When installing ACDSee TM , recorded images can be viewed on your Macintosh.
z
Turn on your Macintosh.
x
Set the included CD-ROM (S-SW5) in the CD-ROM drive of your Macintosh.
c
Double click [English] on the CD-ROM (S-SW5).
v
Follow the on-screen guidance and enter the registration information and proceed with the installation.
99
