Below you will find brief information for Centurion MV-5-C, Centurion C5. This manual provides instructions for the operation of the Centurion controller and its MV-5-C display. Learn about the MV-5-C display features, navigation keys, operational screens, and password protection. Understand how to configure various setup screens, communication ports, and troubleshooting tips. Gain insights into the LED indicators, status modes, and key configuration settings for optimal system performance.
Advertisement
Advertisement
Advertisement
User-configurable operational screens
Password-protected setup screens
Active alarm and shutdown annunciation
Custom control loop functionality
Communication port configurations
Shutdown history tracking
Press the Setup/Enter key on the display and enter the appropriate password.
Press the ESC/ACK key on the display.
Press and hold the Run/Stop key for 2 seconds.
The green LEDs indicate the status of digital outputs, while the red LEDs indicate the status of communication ports.
How to adjust the monitor's display settings?
To adjust the display settings on the monitor itself, use the OSD (On-Screen Display) menu. This can typically be accessed by pressing physical buttons located on the monitor's bezel or back. From the OSD, you can modify brightness, contrast, color temperature, input source, and various picture modes. For software settings, refer to the operating system's display preferences.
How to clean the monitor screen?
To clean the monitor screen, first, power off the monitor and unplug it. Use a soft, lint-free microfiber cloth. For stubborn smudges, slightly dampen the cloth with water or a screen-specific cleaning solution (never spray directly onto the screen). Gently wipe the screen in one direction, avoiding harsh chemicals or abrasive materials.
