Interfaces. Ampac MAN 3038

DISCOVERY PRODUCT GUIDE

Interfaces

A comprehensive range of interfaces for use with Discovery systems and incorporating the Ampac fire alarm control panels is available. They are designed to enable fire protection systems to be engineered simply and effectively without the need for customdesigned equipment.

These interfaces are available in three types of housing. The standard interfaces are designed to be surface or flush-mounted while the DIN-rail versions feature enclosures that clip to a standard

35mm DIN rails (DIN46277) or are screwed to the base of a larger enclosure. Miniature interfaces use very compact enclosures for installation into other equipment.

The standard interface range is fitted with bi-directional, short-circuit isolators. These interfaces allow for easier installation when large numbers of interfaces are required.

The following interfaces may be incorporated into Discovery systems:

•

Input/Output Unit provides a relay output and one monitored input

•

3-channel Input/Output Unit provides 3 relay outputs and 3 monitored inputs

•

Mains Switching Input/Output Unit switches machinery operating at 230V

•

Output Unit provides one relay output

•

Zone Monitor controls a zone of conventional detectors

•

Switch Monitor monitors the operation of a switch

•

Switch Monitor Plus monitors the operation of a switch; also incorporates a time delay

•

Sounder Controller controls the operation of conventional sounders

•

Mini Switch Monitor monitors the operation of a switch and is small enough to fit into other equipment

For further information on the range of compatible interfaces refer to Ampac Product Guide MAN3040.

13

Isolators

13.1 Product Codes

Product Description

XP95/Discovery Isolating Base with Xpert Card

XP95/Discovery Isolator

XP95/Discovery Isolator Base (for above)

All XP95 isolators and isolating bases are suitable for use with

Discovery detectors and manual call points. These are:

For further information on the use of isolators in Discovery systems refer to Ampac Product Data sheet PDS201-9001.

Product Number

45681-284AMP

55000-720AMP

45681-211AMP

Item Number

201-0125

201-0172

201-0006

24

MAN3038-2