Cleaning. Sienna ssp-1990

STEP 8 - CLEANING (As required)

a. Cleaning the Pressing Plate: Place the Pressing Cushion in the center of the

Ironing Board. Place a clean towel over the Pressing Cushion and the

Ironing Board. Set the Steam Control and Temperature Control to their maximum setting. When the Ready Light comes on, gently lower the

Pressing Plate onto the Pressing Cushion. With water in the reservoir tank, press the Steam Burst Control 6 to7 times. Be careful to avoid touching the hot metal surfaces or leaving your hand in the bursts of steam.

b.

Once the Pressing Plate has cooled down you can clean the surface with a damp cloth. DO NOT use any abrasives on the Pressing Plate.

c. The Ironing Board Cover is removable for normal washing. You can rinse the Ironing Board Cover with mild detergent and warm water.

10