advertisement
![Suggestion for Success. Sienna ssp-1990 | Manualzz Suggestion for Success. Sienna ssp-1990 | Manualzz](http://s1.manualzz.com/store/data/003735957_1-f0dda7045d126c1f19a932709b78db8b-360x466.png)
SUGGESTIONS FOR SUCCESS --
USING PRESS CLOTH:
Placing a press cloth ( a piece of clean fabric) between the fabric and the
Pressing Plate may be desirable, especially for more delicate fabrics.
OLDER STYLE BUTTONS AND ZIPPERS:
While most modern buttons and zippers require no special attention, some older types may be heat sensitive. Take care with items that could melt.
Lower the heat or steam settings, place the items
FACE DOWN
on the ironing board, and cover the fabric with a press cloth
BEFORE
pressing. This will help protect delicate accessories and fasteners.
SPRAY BOTTLE METHOD:
Using a Spray Bottle, lightly spray the garment before placing it on the
Ironing Board. This helps to distribute an even, fine mist over the fabric, preparing it to be pressed, and removing all wrinkles.
DAMP CLOTH METHOD:
For the most stubborn or heavy gauge fabrics, place a damp cloth over the area to be pressed. Press the garment normally for a few seconds, then raise the Pressing Plate and allow the steam to escape. Repeat the procedure until the fabric is dry.
11
advertisement
Related manuals
advertisement
Table of contents
- 3 Features of the Digital Steam Press
- 4 Safety Reminders
- 5 Part Identification
- 7 reparation for use
- 7 Filling the water tank
- 7 Turning on the power
- 8 Selecting the temperature
- 9 Steam Control Notes
- 10 Pressing
- 11 Finishing Pressing
- 12 Cleaning
- 13 Suggestion for Success
- 14 Use of the Pressing Cushion
- 15 Techniques for Pressing
- 17 Troubleshooting
- 19 Warranty