advertisement
XRCISE STRESS ECHO MED
Chapter 6 Setup
6.3.6
6.3.7
6.3.8
6.3.9
6.3.10
6.3.11
6.3.12
6.3.13
6.1
6.2
6.3
6.3.1
6.3.2
6.3.3
6.3.4
6.3.5
Switching On ................................................................................................ 24
Switching Off ................................................................................................ 24
Components ................................................................................................. 24
Ergometer ..................................................................................................... 26
Manual switch ............................................................................................... 26
Right handle .................................................................................................. 28
Seat .............................................................................................................. 28
Load display ................................................................................................. 28
Head/shoulder support ................................................................................. 29
Left handle ................................................................................................... 29
Folding pad ................................................................................................... 30
Paper roll holder ........................................................................................... 30
Hip support ................................................................................................... 30
Foot activated locks ..................................................................................... 31
Power connection ........................................................................................ 31
Power swith .................................................................................................. 31
6.3.14 The control panel ......................................................................................... 31
6.3.14.1 The buttons .................................................................................................. 33
6.3.14.2 The display ................................................................................................... 33
6.3.14.3 Connections .................................................................................................. 33
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
2 3
Setup
6 Setup
6.1 Switching On
⊗ Before switching on your exercise machine, make sure the machine is plugged in.
If you have connected several cardiowise machines to one circuit never switch on multiple machines at the same time. Otherwise technical problems might occur.
⊗ Now turn the device on by activating the mains switch on the frame at the foot of the device. The switch must be in position I. If the switch is in position O the machine is switched off
⊗ The illumination of the display shows you immediately if the machine is switched on.
6.2 Switching Of
⊗ Switch off your machine by pressing the power switch. The switch must be in position O.
Take care that the switch-on and switch-off intervals don‘t fall below a time of 30 sec.
Otherwise faults may occur.
6.3 Components
2 4
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
XRCISE STRESS ECHO MED
7
8
5
6
3
4
1
2
9
10
11
12
13
14
15
16
17
Ergometer
Table Top
Right handle (stabilizes the lateral position)
Seat
Load display (patient speed/ power output range)
Hip support
Head and shoulder support
Left handle (supports examination )
Folding pad
Control panel
Paper roll holder
Manual switch for operation of the positioning motors
Foot-activated locks
Power connection
Power switch
Control elements, such as locking pins, clamping levers (all yellow)
Controlling the adjustment devices
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
2 5
Setup
6.3.1 Ergometer
The ergometer on the table is adjustable and can be raised or lowered. In this manner, the
XRCISE STRESS ECHO MED can also be used as an examination table.
The ergometer can be adjusted with a locking pin, activated by a handle (mushroom button) on the right at the foot of the table. The ergometer is moved into the training position by pulling briefly on the handle and moving the ergometer up at the same time until it clicks into place.
Pull briefly on the handle again to fold the ergometer down. The ergometer is moved down largely on its own by a gas strut. Ensure that the pedals are not in the way. Engage the ergometer in its final position by applying slight pressure.
6.3.2 Manual switch
The table top can be adjusted via electric motors and two axes in both the longitudinal and transverse directions (respectively by 45°). The manual switch is used to execute one or more tilting movements.
Please proceed as follows:
⊗ Ensure that the tilting mechanism is only used with the hip support in place in order to avoid damage to health .
⊗
⊗
The table may only be tilted with the adjustable feet locked, in order to prevent instability and collision of the table top with the adjustable feet levers
Ensure a sufficient safety clearance before using the tilting mechanism.
An area with two pushbuttons is located on the front panel of the manual switch for each movement. The symbols indicate the function of the individual keys. The drives are operated as long as the keys are held.
2 6
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
XRCISE STRESS ECHO MED
In addition, three additional individual table settings can be programmed and assigned to the
P1-P3 keys.
Swivel the table in the longitudinal direction
= Tilt around the transverse axis
Swivel the table in the transverse direction
= Tilt around the longitudinal axis
Seat adjustment (see Chap. 6.3.4.)
Individual settings can be saved to the P1-P3 keys. To do so, move the table to the desired position. Press the M key and the respective program key at the same time in order to save the selected position. This is confirmed by a short beep.
In order to recall the desired setting, press and hold the desired key. Then the table moves to the corresponding position .
Function with lowered ergometer:
⊗ If the ergometer is lowered, the table top can be tilted by up to 45° around the longitudinal axis.
⊗ The table can easily be converted to a normal examination table if the ergometer is lowered. The seat must be removed to do so, see section 7.1.4 „Seat“. The head/shoulder support can also be flipped up if necessary, see section 7.1.6
„Head and shoulder support“.
After the training bike has been folded down the lateral axis will be locked and cannot be tilted anymore. It is even locked when operated via the remote control.
Function with the ergometer folded up:
⊗ With the ergometer folded up, the table top can be tilted by up to 45° around the transverse axis. Tilting around the longitudinal axis is locked out at this time.
⊗ Combined tilting around the transverse and longitudinal axes is possible: 30° around the transverse axis and 45° around the longitudinal axis.
⊗
⊗
Adjusting the tilt around the longitudinal axis is locked out automatically as soon as the tilt angle about the transverse axis exceeds 30°.
The tilting adjustment about the transverse axis is automatically limited to 30° if the longitudinal axis is already inclined at an angle of more than 3°.
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
2 7
Setup
User programmable functions:
⊗ The user programmable functions are only available with the ergometer folded up.
6.3.3 Right handle
The handle position can be adjusted horizontally on the standard rail. It provides additional stabilization of the patient during sideways tilting.
6.3.4 Seat
The seat can be positioned easily via a locking mechanism, with a slight rotation it will be get more easy.
The seat is removed by pulling briefly on the mushroom button and turning the seat out of its holder at the same time.
A positioning motor controlled with the manual switch is used to adjust the horizontal position. The supporting pad is automatically adjusted as well.
Please note: In order to avoid injuries, talk to the patient before adjusting the seat and maintain eye contact with the patient while adjusting the seat.
⊗
⊗
⊗
6.3.5 Load display
The display is mounted on a pivoting bracket. This allows it to be swiveled so that the patient can see it.
The icons used on the display (Up and Down arrow) provide feedback to the patients so they know if they have to increase or decrease the pedal frequency:
Orange light left/Up arrow: Pedal frequency too low
Orange light right/Down arrow: Pedal frequency too high
Green lights: Pedal frequency OK
2 8
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
XRCISE STRESS ECHO MED
6.3.6 Head and shoulder support
The head and shoulder support is intended to stabilize the patient on the table. The pads provide a high level of comfort.
The support can be adjusted linearly in the horizontal direction in order to adjust it to the patient‘s size by loosening the clamping lever. To move the head and shoulder support, lift it slightly. This prevents damage to the table top. Once the support is in the desired position, re-tighten the clamping lever to secure it.
If you don‘t need the head and shoulder support or while applying sanitary paper, simply swivel the support up and away from the table top. The bracket with load display is swiveled away at this time.
Loosening the clamping lever move the head and shoulder support
Ensure that the support is folded up over the full swiveling range. Ensure that there is sufficient clear space beside the table for this purpose. The table may only be operated with the support folded up if the support is folded up completely - past 100°. Otherwise there is a risk of patient injury since the head and shoulder support may flip back down .
6.3.7 Left handle
The handle above the head and shoulder support makes it easier to assume the position for examination with the ultrasonic probe.
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
2 9
Setup
6.3.8 Folding pad
Folding the pad down creates on opening in the table top which allows for unrestricted examination with the ultrasonic probe.
Pull the mushroom button on the pad to fold it down. This folds the pad down.
If you don‘t need the head and shoulder support or while applying sanitary paper, simply swivel the support up and away from the table top. The bracket with load display is swiveled away at this time. To restore the full table top, pull the pad up by the handle until it clicks into place.
Pull the mushroom button Fold the pad down
6.3.9 Paper roll holder
For hygienic reasons, it is possible to protect the table top with a paper underlay. A paper roll holder is located under the head of the table top for this purpose. In order to be able to pull the sanitary paper over the table top, loosen the clamping lever on the head and shoulder support, raise it, and pull the sanitary paper through underneath and over the table top. Then re-tighten the clamping lever.
6.3.10 Hip support
The hip support can be adjusted in horizontal and vertical directions.
For vertical adjustment to the patient pull on the trigger (mushroom button) and pull the hip support upwards. After adjusting the support, loose the trigger again.
3 0
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
XRCISE STRESS ECHO MED
For horizontal adjustment to the patient in the transverse direction, loosen the clamping lever.
Adjust the hip support manually. After adjusting the support, re-tighten the clamping lever .
To remove the hip support, pull on the trigger
(mushroom button) and pull the hip support out.
To install the hip support, slide it into the holder until it clicks into place.
In order to avoid injuries, talk to the patient before adjusting the hip support and maintain eye contact with the patient while adjusting the hip support.
6.3.11 Foot-activated locks
See Chapter 5.1 „Setup“.
6.3.12 Power connection
See Chapter 5.4 „Plugging in“.
6.3.13 Power switch
The mains switch is located on the frame at the left side at the foot of the table.
To turn the table on, toggle the switch to the I position.
.
To turn the table off, toggle the switch to the 0 position
6.3.14 The Control Panel
Cardiowise exercise equipment is known for its outstanding ease of use. The XRCISE
STRESS ECHO MED is equipped with a user guidance system that is simple and easy to understand.
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
3 1
Setup
On the control panel you find a display and several buttons. Before you take a closer look at the control panel please consider the following aspects:
1. Do not lean on the control panel or the display. It may get damaged.
2. Do not exert pressure on the display.
3. Only press the buttons lightly. When you press a button you will hear a beep.
3 2
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
XRCISE STRESS ECHO MED
Display
SPO
2
1/MIN
WATT
TIME
BP SYS
BP DIA
PULSE
6.3.14.1 The Buttons
Depending on the model you will find the following buttons on the control panel:
PLUS: With this button you can increase the intensity or change parameters.
MINUS: With this button you can decrease the intensity or change parameters.
START: With this button you can confirm workout mode selections or parameter settings.
STOP: With this button you can cancel a function or stop the machine.
BP: Not assigned
6.3.14.2 The Display
The XRCISE STRESS ECHO MED is equipped with an LCD-display that consists of an monochrome graphic display. In the section below you will find model-specific information on displays, measuring units and their meanings.
Explantation
Oxygen saturation
Rounds per minute
Current performance
Workout time
Not assigned
Not assigned
Current heart rate per minute
Unit
% rpm
Watt
00:00 (min:sek) mmHg mmHg
1/min
6.3.14.3 Connections
At the back of the control panel of the XRCISE STRESS ECHO you can connect the device to measure the oxygen saturation (optional). Moreover you will find a USB port.
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
3 3
Setup
SPO
2
Connect the 9-pin cable to the corresponding connector. To disconnect just pull the plug from the connector.
Please note: For the SPO
2
module only use finger clips that have been accepted by the manufacturer. You can order them at cardiowise.
USB
The USB port is needed to update the device software. Format any USB sticks that you want to use for updating the software in order to avoid damages to the operating system.
Please review the additional safety and operational instructions in this manual!
3 4
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
advertisement
Related manuals
advertisement