Purge Delivery Table. Baxter Auto Syringe AS50

Additional Functions and Operations purge accumulated volume will disappear when the START key is pressed and will not be included in the total volume.

4.

Repeat steps 2 and 3 as often as necessary to obtain a steady drip at the end of the tubing.

Purge Delivery Table

Syringe

Manufacturer

B-D Plastic

Monoject

Terumo

Syringe Size

(mL)

1

3

5

10

20

30

60

1

3

6

12

20

35

60

1

3

5

10

20

30

60

Approximate

Purge

Volume (mL)

0.02

0.08

0.15

0.22

0.39

0.50

0.75

0.02

0.09

0.17

0.26

0.43

0.59

0.75

0.02

0.09

0.18

0.27

0.44

0.58

0.75

Purge Rate

(mL/hr)

11

38

74

107

188

241

366

11

41

83

126

208

285

366

11

41

87

129

210

276

438

Purge Rate

(mL/min)

0.19

0.63

1.2

1.7

3.1

4.0

6.1

0.19

0.69

1.4

2.1

3.5

4.6

7.3

0.19

0.68

1.3

2.1

3.4

4.7

6.1

NOTE: Purge volume and rate information shown applies to pumps configured for Rate Range = H (High).

NOTE: Purge volumes are approximately the amount delivered in a single complete purge delivery, without slack in the drive system.

NOTE: The volume of purged fluid is not added to the amount in the TOTAL mL field.

Page 54 Auto Syringe AS50 Infusion Pump Operator’s Manual 07-19-B3-430