238
Developing RAW Images
You can convert captured RAW images into JPEG or TIFF images.
Only RAW images captured with this camera can be edited. RAW images and
JPEG images captured with other cameras cannot be edited on this camera.
Developing One RAW Image
8
1
Press the four-way controller (
3
) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (
2345
) to select
h
(RAW
Development) and press the
4
button.
The screen to select a development method is displayed.
3
Use the four-way controller (
23
) to select [Developing a Single
Image] and press the
4
button.
Developing a Single Image
The parameters recorded in the image file appear.
Proceed to Step 6 if you do not need to change the parameters.
Developing Multiple Images
MENU
If there are no images that can be processed, [No image can be processed] appears.
OK OK
4
Use the four-way controller
(
23
) to choose a parameter you want to change.
You can turn the front e-dial (
R
) to select a different image.
RAW JPEG
16
M
ISO
NR
239
MENU OK 100-0001
The following parameters can be changed.
Parameter
File Format
Recorded Pixels
Quality Level
*1
Custom Image
White Balance
*2
*1
Sensitivity
High-ISO NR
Shadow Correction
Distortion Correction
*3
Lat-Chromatic-Ab Adj
*3
Color Space
Value
JPEG/TIFF p
(4928×3264)/
J
(3936×2624)/
P
(3072×2048)/ i
(1728×1152)
Z
(Premium) /
C
(Best) /
D
(Better) /
E
(Good)
Bright/Natural/Portrait/Landscape/
Vibrant/Muted/Bleach Bypass/Reversal
Film/Monochrome
F
(Auto)/
G
(Daylight)/
H
(Shade)/
^
(Cloudy)/
J
D
(Fluorescent Light
Daylight Color)/ J
N
(Fluorescent Light
Daylight White)/
J
W
(Fluorescent Light
Cool White)/
J
L
(Fluorescent Light
Warm White)/
I
(Tungsten Light)/
L
(Flash)/ f
/ K (Manual)/
K
(Color
Temperature)
-2.0 to +2.0
Auto/Off/Low/Medium/High
Off/Low/Medium/High
Off/On
Off/On sRGB/AdobeRGB
Page
-
p.178
p.179
p.197
p.183
-
p.85
p.190
p.193
p.193
p.189
*1 This cannot be set when [File Format] is set to [TIFF]. (The setting is fixed to p
.)
*2 This cannot be set for RAW images taken in Multi-exposure mode.
*3 This can be selected only when a compatible lens is attached. (p.297)
8
240
5
Use the four-way controller (
45
) to change the value.
For File Format, Recorded Pixels, and Quality Level, press the four-way controller (
5
) and use the four-way controller (
23
) to select an item.
For Custom Image and White Balance, press the four-way controller (
5
) to display the setting screen.
6
Press the
4
button.
The save confirmation screen appears.
7
Use the four-way controller (
23
) to select [Save as] and press the
4
button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (
[Exit].
23
) to select [Continue] or
Select [Continue] to edit other images.
9
Press the
4
button.
If you select [Continue] in Step 8, the screen for selecting the parameters in Step 4 appears again.
8
Developing Multiple RAW Images
You can develop multiple RAW images with the same settings.
1
Select [Developing Multiple Images] in Step 3 on p.238 and
press the
4
button.
The multi-image display screen appears.
Refer to p.212 for details on operations during the multi-image display.
2
Use the four-way controller (
2345
) to select the RAW images to be developed and press the
4
button.
3
Press the
L
button.
The development confirmation screen appears.
4
Use the four-way controller (
23
) to select [Develop images as shot] or [Develop images with modified settings].
To change parameters, select [Develop images with modified settings].
Develop images as shot
Develop images with modified settings
MENU OK OK
5
Use the four-way controller
(
2345
) to set [File Format],
[Recorded Pixels] and [Quality
Level].
RAW JPEG
JPEG
16
M
If [TIFF] is selected, the [Recorded Pixels] and [Quality Level] settings are not available.
MENU OK
When [Develop images with modified
settings] is selected, refer to p.239 to change other parameters. All images
are developed with the same settings.
6
Press the
4
button.
The save confirmation screen appears.
7
Use the four-way controller (
23
) to select [Save as] and press the
4
button.
The selected RAW images are developed and saved as new images.
241
8
242
Memo
9
Changing Additional
Settings
This chapter describes how to change additional settings.
How to Operate the Set-up Menu ......................244
Formatting the SD Memory Card ......................246
Customizing Buttons and Dials ........................247
Setting the Beep, Date and Time, and Display
Language ............................................................252
Adjusting the Monitor and the Menu Display.....257
Setting the Folder/File Number .........................263
Selecting the Power Settings ............................266
Setting the Photographer Information .............269
Setting the DPOF Settings .................................271
Correcting Defective Pixels in the CMOS
Sensor (Pixel Mapping) ......................................273
Selecting Settings to Save in the Camera
(Memory) .............................................................274
