Correcting Defective Pixels in the
CMOS Sensor (Pixel Mapping)
Pixel Mapping is a function for mapping out and correcting defective pixels in the CMOS sensor.
1
Select [Pixel Mapping] in the [ the four-way controller (
5
).
R
Set-up 4] menu and press
The [Pixel Mapping] screen appears.
2
Press the four-way controller (
2
) to select [Pixel Mapping] and press the
4
button.
Defective pixels are mapped out and corrected, and the screen that was displayed before selecting the menu appears again.
When the battery level is low, the message [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit (optional) or change to the battery with ample power remaining.
273
9
