Shortcut buttons. Barco Bragi CinemaScope, Bragi

Getting to know the projector.

Item

No.

1

Name

LCD Display

4

5

6

2

3

Navigation keys

Menu button

Power button

Back

OSD ON/OFF

7 Input

8 Shutter

9

10

Test Patterns

Lens

Description

Shows navigation menu incl. sub menus and projector status screens

(dashboard, notification, about and preview).

Navigation arrows (up, down, left, right), confirm selection ( ✓ )

Toggle between OSD / Information menu.

Power on / standby / ready

Back to previous screen.

Deactivate the On Screen Display (OSD). Only critical warnings will be displayed.

Shortcut to input source menu on LCD. Use navigation keys to select and enable input.

Enable and disable the lens shutter function. This is not a mechanical shutter, but it toggles the light source on and off. Backlight is red when the shutter are enabled.

Shortcut to test pattern menu on LCD. Use navigation keys to select the desired pattern.

Shortcut to lens function. A test pattern displays on the OSD. LCD screen displays the navigation keys to manage and confirm actions.

2.6 Shortcut buttons

About the keypad shortcut buttons

On the keypad, there are three shortcut buttons; for lens function, test pattern selection, and input selection.

See

“Local keypad”, page 18

and

“Remote control”, page 20 for location and description. (The remote control

has only the test pattern shortcut button).

When the test pattern or input shortcut button is pressed, a pop up menu will show up on the LCD screen.

Make a selection by the arrow keys, and confirm.

Image 2–8 Test pattern pop up menu

R5911698 /04 Bragi 19