Configuration and Use Manual
MMI-20019053
Using the transmitter display
October 2022
Table A-2: Display codes for process variables (continued)
Code
STDVI
TCDENS
TCORI
TCORR
TCVOL
TUBEF
WTAVE
Definition
Standard volume inventory
Temperature-corrected density
Temperature-corrected inventory
Temperature-corrected total
Temperature-corrected volume
Raw tube frequency
Weighted average
Comment or reference
Concentration measurement application only
Petroleum measurement application only
Petroleum measurement application only
Petroleum measurement application only
Petroleum measurement application only
A.5 Codes and abbreviations used in display menus
Table A-3: Codes and abbreviations used in display menus
Code or abbreviation
ACK ALERT
ACK ALL
ACT
ADDR
AO1
AO 1 SRC
AO2
Definition
Acknowledge alert
Acknowledge all alerts
Action
Address
Analog output 1
(primary mA Output)
Fixed to the process variable assigned to the primary output
Analog output 2
(secondary mA Output)
Auto Scroll
Backlight
Comment or reference
AUTO SCRLL
BKLT
B LIGHT
CAL
CH A
CHANGE PASSW
CHANGE CODE
CH B
CH C
CONFG
CORE
CUR Z
CUSTODY XFER
Calibrate
Channel A
Change password or passcode
Channel B
Channel C
Configuration
Core processor
Current zero
Custody transfer
Change the password or passcode required for access to display functions
Configuration and Use Manual 223
Using the transmitter display
October 2022
Configuration and Use Manual
MMI-20019053
EXTRN
FAC Z
FCF
FLDIR
FL SW
FLSWT
FO
FO FREQ
FO RATE
FREQ
Table A-3: Codes and abbreviations used in display menus (continued)
Code or abbreviation
DENS
D EV
Definition
Density
Discrete event
Comment or reference
Events configured using the enhanced event model
Fuel consumption applications only DFLOW
DGAIN, DRIVE %
DI
DISBL
DO1
DO2
DSPLY
E1OR2
ENABL
ENABLE ACK
ENABLE ALERTS
ENABLE AUTO
ENABLE OFFLN
ENABLE PASSW
ENABLE RESET
ENABLE START
EVNT1
EVNT2
Differential mass flow
Drive gain
Discrete Input
Disable
Discrete Output 1
Discrete Output 2
Display
Event 1 or Event 2
Enable
Enable acknowledge all
Enable alert menu
Enable Auto Scroll
Enable off-line
Enable password
Enable totalizer reset
Enable totalizer start
Event 1
Event 2
Select to disable
Events configured using the basic event model
Select to enable
Enable or disable the ACK ALL function
Access to alert menu from display
Enable or disable the Auto Scroll function
Access to off-line menu from display
Enable or disable password protection for display functions
Enable or disable totalizer reset from display
Enable or disable totalizer start/stop from display
Event configured using the basic event model only
Event configured using the basic event model only
External
Factory zero
Flow calibration factor
Flow direction
Flow switch
Frequency Output
Frequency factor
Rate factor
Frequency
224 Micro Motion 2700 Transmitters with Configurable Input/Outputs
Configuration and Use Manual
MMI-20019053
Using the transmitter display
October 2022
MASS
MBUS
MFLOW
MSMT
MTR F
OFF-LINE MAINT
OFFLN
OIL
OIL60
P/UNT
POLAR
PRESS
QUAD r.
SCALE
SFM60
Table A-3: Codes and abbreviations used in display menus (continued)
Code or abbreviation
FR FL
GSV
HYSTRSIS
INTERN
IO
LANG
LOCK
LOOP CUR
M_ASC
M_RTU
MAO1
MAO2
SFO60
Definition
Frequency=Flow
Gas standard volume
Hysteresis
Internal
Input/output
Language
Write-protect
Loop current
Modbus ® ASCII
Modbus ® RTU mA Output 1
(primary mA Output) mA Output 2
(secondary mA Output)
Mass flow
Modbus
Mass flow
Measurement
Meter factor
Off-line maintenance
Off-line
Uncorrected oil flow
Corrected Net Oil Flow
Pulses/unit
Polarity
Pressure
Quadrature
Revision
Scaling method
Shrinkage factor corrected volume of mix at 60F
Shrinkage Fac Corr
Net Oil Total at Reference
Comment or reference
PVR applications only
PVR applications only
PVR applications only
PVR applications only
Configuration and Use Manual 225
Using the transmitter display
October 2022
Configuration and Use Manual
MMI-20019053
Table A-3: Codes and abbreviations used in display menus (continued)
Code or abbreviation
SIM
Definition
Simulation
Comment or reference
Used for loop testing, not simulation mode.
Simulation mode is not accessible through the display.
SPECL
SRC
TEMP, TEMPR
UNT/P
VAR 1
VER
VERFY
VFLOW
VOL
WATER
WATER%
WCT60%
WRPRO
WTR60
XMTR
Special
Source
Temperature
Units/pulse
Display Variable 1
Version
Verify
Volume flow
Volume, volume flow
Uncorrected Net
Water Flow Rate
Uncorrected Water Cut
Water Cut 60F
Write protect
Corrected Net
Water Flow
Transmitter
Variable assignment
PVR applications only
PVR applications only
PVR applications only
PVR applications only
PVR applications only
226 Micro Motion 2700 Transmitters with Configurable Input/Outputs
