advertisement
![FAMILIARIZATION. Oliver Travel Trailers Legacy Elite I, Legacy Elite II | Manualzz FAMILIARIZATION. Oliver Travel Trailers Legacy Elite I, Legacy Elite II | Manualzz](http://s1.manualzz.com/store/data/068640679_1-32eb1ecf3884f27ad05a914223c7667d-360x466.png)
DOMETIC THERMOSTAT
FAMILIARIZATION
To familiarize yourself with the operation of your new CT thermostat, review the following diagrams and accompanying text explaining functional characteristics of this system.
A. Features
● Capacitive Touch Interface
● Blue LED Backlight
● Liquid Crystal Display (LCD)
● Auto Fan
● Indoor Temperature Display
● Air conditioner can provide additional indoor air circulation during furnace operation.
B. System Initialization
A system initialization will need to be performed by installer after system installation.
1. Make sure CT thermostat is Off. See “D. Quick Reference” on page (3).
2. Press the button, and simultaneously press and hold the / Mode button for three seconds. LCD will show “ - ”.
This completes system initialization.
Furnace On / Off temperature differential should be set at this time. See “C. “Furnace” - Furnace Mode” on page (7) for more information.
C. Factory Preset Settings
The CT thermostat is pre-programmed. Review settings below and adjust for personal comfort level.
Factory Preset Settings
Heating 68ºF / 20ºC
Cooling 72ºF / 22ºC
Fan Speed
Mode
Furnace Differential
Auto
Off
2ºF
D. Quick Reference
See (FIG. 1) for control button quick reference.
55
33
advertisement
Related manuals
advertisement
Table of contents
- 29 Notes on using the manual
- 31 Specifications
- 31 Components
- 32 Installation
- 32 Operation
- 33 Cleaning
- 34 Winterization and storage
- 35 10 Troubleshooting
- 36 12 Customer service
- 42 Explanation of symbols and safety instructions
- 43 2 General information
- 43 3 Intended use
- 44 4 Installation
- 47 5 Operation
- 51 6 Maintenance, cleaning, and storage
- 51 7 Disposal
- 52 8 Replacement parts
- 52 Limited two-year warranty
- 54 INTRODUCTION
- 54 DOCUMENT SYMBOLS
- 55 FAMILIARIZATION
- 55 Features
- 55 System Initialization
- 55 Factory Preset Settings
- 55 Quick Reference
- 56 PROGRAMMING AND OPERATION
- 56 On / Off
- 56 Temperature Format ºF / ºC
- 57 Inside Temperature
- 57 Mode Selection
- 58 Fan Speed
- 58 Temperature Set-Point
- 59 MODE DESCRIPTION
- 59 “Off” - Off Mode
- 59 “Cool” - Cool Mode
- 59 “Furnace” - Furnace Mode
- 59 “Heat Pump” - Heat Pump Mode (Select Models)
- 60 “Heat Strip” - Heat Strip Mode (Select Models)
- 60 “Fan” - Fan Mode
- 60 SPECIAL FEATURES
- 60 Capacitive Touch Interface
- 60 Auto Fan
- 61 Compressor Time Delay
- 61 Defrost Cycle
- 61 Low Ambient Heat Pump Lock Out
- 61 Power Interruption
- 61 LCD Error Code
- 62 GENERAL INFORMATION
- 62 Frost Formation On Cooling Coil
- 62 Heat Gain
- 62 Condensation
- 63 MAINTENANCE
- 63 Air Filter
- 63 CT Thermostat
- 63 SERVICE - UNIT DOES NOT OPERATE