Configuration of the discrete specific application
6.3
Discrete output channel parameters
Presentation
Subject of this section
What's in this
Section?
This section presents the different output channel parameters by type of Discrete module.
This Section contains the following Maps:
Topic
Discrete output parameters for in-rack 8-channel modules.
Discrete output parameters for in-rack modules with over 8 channels
Parameters of 8, 10 or 12 channel TBX discrete outputs remoted on the FIPIO bus
Page
91
92
94
Parameters of 16 channel TBX discrete outputs remoted on the FIPIO bus
Momentum Parameters of Momentum discrete outputs remoted on the FIPIO bus
Parameters of IP67 discrete outputs remoted on the FIPIO bus
95
96
97
90
TLX DS 57 PL7 xx
Configuration of the discrete specific application
Discrete output parameters for in-rack 8-channel modules.
Presentation 8-channel discrete output modules have parameters per channel or for all channels.
Parameters
TSX DSY 08R5A
TSX DSY 08S5
TSX DSY 08T2
TSX DSY 08T22
TSX DSY 08T31
TSX DSY 08R5
The table below shows the parameters available for each in-rack 8-channel discrete output module.
Group of 8 channels
Module Reference Associated task
TSX DSY 08R4D Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Reactivation
Programmed / Automatic
Programmed / Automatic
Programmed / Automatic
Programmed / Automatic
Programmed / Automatic
Programmed / Automatic
Programmed / Automatic
Fallback mode
Fallback /
Maintain
-
Supply fault monit.
Fallback /
Maintain
-
Fallback /
Maintain
-
0 / 1
0 / 1
Fallback /
Maintain
Active / Inactive 0 / 1
Fallback /
Maintain
Active / Inactive 0 / 1
Fallback /
Maintain
Active / Inactive 0 / 1
Fallback /
Maintain
0 / 1
Channel by channel.
Fallback value
0 / 1
Note: Parameters in bold correspond to the parameters configured by default.
TLX DS 57 PL7 xx
91
Configuration of the discrete specific application
Discrete output parameters for in-rack modules with over 8 channels
Presentation Discrete output modules with more than 8 channels have parameters per channel or for all channels.
Parameters
TSX PAY 262
TSX PAY 262
Key:
(1)
(2)
The table below shows the parameters available for each in-rack discrete output module with more than 8 channels.
Group of 8 channels
Module
Reference
TSX DSY 16S5
TSX DSY 16T2
TSX DSY 16T3
TSX DSY 32T2K
Number of outputs
16
16
16
32
Associated task
Mast / Fast /
None
Mast / Fast /
None
Mast / Fast /
None
Mast / Fast /
None
TSX DSY 64T2K
TSX DSY 16R5
64
16
Mast / Fast /
None
Mast / Fast /
None
TSX DSY 16S4 16 Mast / Fast /
None
TSX DMY 28 FK 12 (output part) Mast / Fast /
None
TSX DMY 28RFK 12 (output part) Mast / Fast /
None
2 (output part)
4 (output part)
Mast / Fast /
None
Reactivation
Programmed /
Automatic
Fallback mode
Fallback /
Maintain
Programmed /
Automatic
Fallback /
Maintain
Programmed /
Automatic
Fallback /
Maintain
Programmed /
Automatic
Fallback /
Maintain
Programmed /
Automatic
-
Fallback /
Maintain
Fallback /
Maintain
Fallback /
Maintain
Programmed /
Automatic (1)
Fallback /
Maintain
Programmed /
Automatic (1)
Fallback /
Maintain
-
Reactivation is chosen globally for the 12 output channels.
Only for TSX DMY 28 RFK.
Channel by channel.
Supply fault monit.
Fallback value
0 / 1
Active /
Inactive
Active /
Inactive
Active /
Inactive
-
-
Active /
Inactive
Active /
Inactive
-
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1 /
Continuous
(2)
-
92
TLX DS 57 PL7 xx
Configuration of the discrete specific application
Note: l l
Parameters in bold correspond to the parameters configured by default.
The modules' first group of channels (addresses from 0 to 7) is always assigned to a Mast or Fast task. For subsequent groups the following additional option is available: None (no task associated with the group of unused channels).
TLX DS 57 PL7 xx
93
Configuration of the discrete specific application
Parameters of 8, 10 or 12 channel TBX discrete outputs remoted on the FIPIO bus
Presentation The 8, 10 or 12 channel discrete TBX output modules have parameters per channel, per group of 8 channels or for all channels.
Parameters
Module
Reference
TBX ESP 08C22
TBX DSS 1235
TBX DMS 1025
12
The table below shows the parameters available for each 8, 10 or 12 channel TBX discrete output module remoted on the FIPIO bus.
Number of outputs
8
Module
Associated task
Mast / Fast
Mast / Fast
2 (output part) Mast / Fast
Group of 8 channels
Reactivation Fallback mode
Programmed
/ Automatic
-
Fallback /
Maintain
Fallback /
Maintain
Programmed
/ Automatic
Fallback /
Maintain
Channel by channel
Fallback value
0 / 1
Wiring
Check
Yes / No
0 / 1
0 / 1
-
-
Note: Parameters in bold correspond to the parameters configured by default.
94
TLX DS 57 PL7 xx
Configuration of the discrete specific application
Parameters of 16 channel TBX discrete outputs remoted on the FIPIO bus
Presentation The 16 channel discrete TBX output modules have parameters per channel, per group of 8 channels or for all channels.
Parameters
Module
Reference
TBX CSP 1625
TBX DSS 1622
TBX ESP 1622
TBX DSS 16C22
TBX CSP 1622
TBX DSS 1625
TBX DMS 1625
The table below shows the parameters available for each 16 channel TBX discrete output module remoted on the FIPIO bus.
Number of outputs
16
16
16
16
TBX DMS 16C22 16
TBX DMS 16C222 16
16
16
8 (output part)
TBX DMS 16S44 8 (output part)
TBX DMS 16P22 (1)
Module
Associated task
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Group of 8 channels
Reactivation Fallback mode
-
Programmed
/ Automatic
-
Fallback /
Maintain
Programmed
/ Automatic
Fallback /
Maintain
Programmed
/ Automatic
Fallback /
Maintain
Programmed
/ Automatic
Fallback /
Maintain
Programmed
/ Automatic
Programmed
/ Automatic
Fallback /
Maintain
-
-
-
-
Fallback /
Maintain
Fallback /
Maintain
Fallback /
Maintain
Programmed
/ Automatic
Fallback /
Maintain
Channel by channel
Fallback value
Wiring
Check
-
0 / 1
-
-
0 / 1
0 / 1
0 / 1
0 / 1
-
0 / 1
0 / 1
0 / 1
0 / 1
-
Yes / No
Yes / No
Yes / No
-
-
-
-
-
Key:
(1) 8 programmable output channels.
Note: Parameters in bold correspond to the parameters configured by default.
TLX DS 57 PL7 xx
95
Configuration of the discrete specific application
Momentum Parameters of Momentum discrete outputs remoted on the FIPIO bus
Presentation
Parameters
The discrete Momentum output modules on the FIPIO bus have parameters for all channels.
The table below shows the parameters available for each Momentum discrete output module.
Module Reference Number of inputs
170 ADO 340 00
170 ADO 350 00
170 ADO 530 50
170 ADM 350 10
170 ADM 390 30
170 ADM 370 10
16
32
8
16 (output part)
8 (output part)
8 (output part)
Associated task (for the module)
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Mast / Fast
Note: Parameters in bold correspond to the parameters configured by default.
96
TLX DS 57 PL7 xx
Configuration of the discrete specific application
Parameters of IP67 discrete outputs remoted on the FIPIO bus
Presentation
Parameters
The Discrete IP67 output modules on the FIPIO bus have parameters for all channels.
The table below shows the parameters available for each Momentum discrete output module.
Module Reference Number of inputs
TSX EMF 16DT2
TSX ESF 08T22
8 (output part)
8
Associated task (for the module)
Mast / Fast
Mast / Fast
Note: Parameters in bold correspond to the parameters configured by default.
TLX DS 57 PL7 xx
97
