Table of Contents. Schneider Electric Software PLC Application-Specific Functions, Junior/Pro, 4.5
Реклама
Реклама
Table of Contents
About the Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Part I Shared application-specific functions . . . . . . . . . . . . . . 17
Chapter 1 Common application specific functions: General . . . . . . . . . . 19
Chapter 2 Objects associated with specific applications . . . . . . . . . . . . 27
2.1
Addressing of language objects associated with specific applications . . . . . . . . 29
Addressing of built-in application-specific interfaces. . . . . . . . . . . . . . . . . . . . . . 30
Addressing input/output module objects in rack . . . . . . . . . . . . . . . . . . . . . . . . . 32
Addressing of language objects for modules remoted on the FIPIO bus . . . . . . 35
Addressing of language objects associated with AS-i bus . . . . . . . . . . . . . . . . . 38
2.2
2.3
WRITE_CMD: Writing command words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
READ_PARAM: Reading adjustment parameters . . . . . . . . . . . . . . . . . . . . . . . 49
WRITE_PARAM: Writing adjustment parameters . . . . . . . . . . . . . . . . . . . . . . . . 50
SAVE_PARAM: Saving adjustment parameters . . . . . . . . . . . . . . . . . . . . . . . . . 51
RESTORE_PARAM: Restoring adjustment parameters . . . . . . . . . . . . . . . . . . . 53
2.4
35012326 00 July 2006
5
6
Automatic symbolization of objects associated with a channel . . . . . . . . . . . . . . 59
Chapter 3 Application-specific instructions . . . . . . . . . . . . . . . . . . . . . . . 61
Accessing a specific function, method or procedure type instruction . . . . . . . . . 63
Chapter 4 Appendices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Reminders concerning the configuration editor . . . . . . . . . . . . . . . . . . . . . . . . . . 66
How to declare a remote module on the FIPIO bus. . . . . . . . . . . . . . . . . . . . . . . 71
Application-specific fault processing (in-rack modules) by program . . . . . . . . . . 75
Part II Discrete specific application . . . . . . . . . . . . . . . . . . . . . . 79
Chapter 5 General presentation of the discrete application -specific
function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Chapter 6 Configuration of the discrete specific application . . . . . . . . . 85
6.1
Description of the configuration screen for a discrete module . . . . . . . . . . . . . . . 88
Accessing the configuration screen for an in -rack discrete module.. . . . . . . . . . 90
Accessing the configuration screen for a discrete module remoted on the FIPIO
Modifying the configuration parameters of a discrete module's: General . . . . . . 93
6.2
Parameters of TBX discrete inputs remoted on the FIPIO bus . . . . . . . . . . . . . . 97
Parameters of Momentum discrete inputs remoted on the FIPIO bus. . . . . . . . . 98
Parameters of IP67 discrete inputs remoted on the FIPIO bus . . . . . . . . . . . . . . 99
6.3
Discrete output parameters for in-rack 8-channel modules. . . . . . . . . . . . . . . . 101
Discrete output parameters for in-rack modules with over 8 channels . . . . . . . 102
35012326 00 July 2006
Parameters of 8, 10 or 12 channel TBX discrete outputs remoted on the FIPIO
Parameters of 16 channel TBX discrete outputs remoted on the FIPIO bus . . 105
Momentum Parameters of Momentum discrete outputs remoted on the FIPIO
Parameters of IP67 discrete outputs remoted on the FIPIO bus. . . . . . . . . . . . 107
6.4
Configuring the programmable channels of the TBX DMS 16P22 module . . . . 109
Modifying the Task parameter of a discrete module . . . . . . . . . . . . . . . . . . . . . 110
Modifying the Wiring check parameter of a TBX discrete module. . . . . . . . . . . 111
Modifying the Monitoring of external supply fault parameter for a discrete
Modifying the Functions parameter of a discrete input module. . . . . . . . . . . . . 113
Modifying the Filtering parameter of a discrete input module.. . . . . . . . . . . . . . 115
How to modify the Latching parameter of a discrete input module . . . . . . . . . . 116
Parametering the Run/Stop input of a discrete module. . . . . . . . . . . . . . . . . . . 117
Modifying the Fallback mode parameter of a discrete output module. . . . . . . . 118
Modifying the Reactivation of outputs parameter of a discrete module. . . . . . . 119
Chapter 7 Debugging discrete modules . . . . . . . . . . . . . . . . . . . . . . . . . 121
Presentation of the debug function of a discrete module. . . . . . . . . . . . . . . . . . 122
Description of the debug screen of a discrete module . . . . . . . . . . . . . . . . . . . 123
Accessing the debug screen for an in-rack discrete module. . . . . . . . . . . . . . . 125
Accessing the diagnostics function of a discrete module . . . . . . . . . . . . . . . . . 126
Accessing the channel diagnostics function of a discrete module . . . . . . . . . . 127
How to access the SET and RESET commands . . . . . . . . . . . . . . . . . . . . . . . 129
Accessing the masking/unmasking function for an event . . . . . . . . . . . . . . . . . 130
Accessing the reactivation of outputs command . . . . . . . . . . . . . . . . . . . . . . . . 131
Chapter 8 Bits and words associated with discrete specific
applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
8.1
Addressing of language objects associated with discrete in-rack I/O modules. 136
Addressing of language objects associated with discrete I/O modules
8.2
Language objects associated with the discrete specific application . . . . . . . . . 139
Implicit exchange language objects associated with the discrete specific
35012326 00 July 2006
7
8
Exchange management: Exchanges in progress module %MW@module
.MOD.0:Xj or channel %[email protected]:Xj . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Exchange management: Module %[email protected]:Xj or channel
Explicit exchange object: %[email protected]:Xj channel status . . . . . . . . . . . . 146
Explicit exchange object: Status Module %[email protected]:Xj. . . . . . . . . 147
Explicit exchange object: %[email protected]:Xj channel command . . . . . . . . . 149
Chapter 9 Installation of the discrete reflex module . . . . . . . . . . . . . . . 151
9.1
General presentation of discrete reflex module . . . . . . . . . . . . . . . . . . . . . . . . . 153
9.2
Reflex function block: Operation-idle time with value selection . . . . . . . . . . . . . 166
Reflex function block: Retriggerable monostable. . . . . . . . . . . . . . . . . . . . . . . . 169
Reflex function block: Monostable with time delay . . . . . . . . . . . . . . . . . . . . . . 170
Reflex Function Block: 2 Threshold Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Reflex function block: Came électronique simple . . . . . . . . . . . . . . . . . . . . . . . 181
Reflex function block: 1 threshold intervalometer . . . . . . . . . . . . . . . . . . . . . . . 183
Reflex function block: PWM (Pulse Width Modulation) . . . . . . . . . . . . . . . . . . . 186
Reflex function block: Detection of underspeed. . . . . . . . . . . . . . . . . . . . . . . . . 187
Reflex function block: Type 1 command-check . . . . . . . . . . . . . . . . . . . . . . . . . 192
Reflex function block: Type 2 command-check . . . . . . . . . . . . . . . . . . . . . . . . . 194
Reflex function block: Command-counting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
9.3
Presentation of the reflex function configuration editor . . . . . . . . . . . . . . . . . . . 203
Adjusting the configuration parameters of a reflex function . . . . . . . . . . . . . . . . 206
35012326 00 July 2006
9.4
Bits and words associated with discrete reflex module . . . . . . . . . . . . . . . . . . . 209
Implicit exchange language objects associated with module
Explicit exchange language objects associated with module
Part III AS-i Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Chapter 10 General introduction to the AS-i Bus . . . . . . . . . . . . . . . . . . . 217
Architecture of the TSX SAY 100 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
How to declare an AS-i communication module in the PLC rack . . . . . . . . . . . 224
How to access the AS-i Bus configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Chapter 11 AS-i bus configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Description of an AS-i communication module’s configuration screen . . . . . . . 228
How to define a slave device on the AS-i bus. . . . . . . . . . . . . . . . . . . . . . . . . . 230
How to modify the AS-i Bus software configuration . . . . . . . . . . . . . . . . . . . . . 233
How to access the description of an AS-i slave . . . . . . . . . . . . . . . . . . . . . . . . 234
How to define a new slave profile in the standard AS-I catalogue . . . . . . . . . . 236
How to modify AS-i slave general parameters: Automatic addressing . . . . . . . 238
How to modify AS-i slave general parameters: Fallback mode. . . . . . . . . . . . . 239
Chapter 12 Debugging the AS-i bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Description of an AS-i module’s debugging screen. . . . . . . . . . . . . . . . . . . . . . 243
How to access functionality in the module diagnostics and channel
How to access adjustment of an AS-i device’s parameters . . . . . . . . . . . . . . . 249
How to access the AS-i channels’ forcing/unforcing function . . . . . . . . . . . . . . 250
How to access the SET and RESET commands of the AS-i channels . . . . . . . 251
Automatic replacement of a faulty AS-i slave . . . . . . . . . . . . . . . . . . . . . . . . . . 252
How to insert a slave device into an existing AS-i configuration. . . . . . . . . . . . 253
How to modify the address of an AS-i device . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Chapter 13 Bits and words associated with the AS-i function . . . . . . . . 255
13.1
Addressing objects associated with the AS-i function . . . . . . . . . . . . . . . . . . . . 257
35012326 00 July 2006
9
10
Adressing language objects associated with slave devices connected to the
13.2
Language objects associated with the AS-i function . . . . . . . . . . . . . . . . . . . . . 258
Implicit exchange objects associated with the AS-i function . . . . . . . . . . . . . . . 259
Management of exchanges: Module %MWxy.MOD.0:Xj or channel
Exchange management: Module %MWxy.MOD.1:Xj or channel
Explicit exchange objects: %MWxy.0.2:Xj to %MWxy.0.23:Xj channel status. . 263
Explicit exchange object: %MWxy.0.24:Xj channel command. . . . . . . . . . . . . . 265
Explicit exchange object: %MWxy.0.25 to %MWxy.0.56 parameter
Explicit exchange object: Status %MWxy.MOD.2:Xj . . . . . . . . . . . . . . . . . . . . . 267
Chapter 14 AS-i operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Chapter 15 AS-i performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Chapter 16 DFB for AS-i Security Monitor . . . . . . . . . . . . . . . . . . . . . . . . 279
Part IV AS-i V2 bus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Chapter 17 General introduction to the AS-i V2 Bus . . . . . . . . . . . . . . . . 283
Structure of a Standard Address AS-i slave . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
How to Declare an AS-i Communication Module in the PLC Rack . . . . . . . . . . 292
How to Access Configuration of the AS-i V2 Bus . . . . . . . . . . . . . . . . . . . . . . . 293
Chapter 18 AS-i V2 bus configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
Description of an AS-i V2 communication module’s configuration screen. . . . . 296
How to define a slave device on the AS-i V2 bus . . . . . . . . . . . . . . . . . . . . . . . 298
35012326 00 July 2006
How to modify the AS-i V2 Bus software configuration . . . . . . . . . . . . . . . . . . . 302
How to access the description of an AS-i V2 slave . . . . . . . . . . . . . . . . . . . . . . 303
How to define a new slave profile in the standard AS-i V2 catalog . . . . . . . . . . 305
How to modify the general parameters of an AS-i V2 slave: Automatic
How to modify the parameters of an AS-i V2 slave. . . . . . . . . . . . . . . . . . . . . . 308
How to modify the parameters of an analog AS-i V2 slave . . . . . . . . . . . . . . . . 309
How to Modify the Parameters of an AS-i V2 Slave with Combined
Chapter 19 Debugging the AS-i V2 bus . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Description of an AS-i V2 module's debugging screen . . . . . . . . . . . . . . . . . . . 315
How to access module- and channel-diagnostics functions on an AS-i V2
How to access adjustment of an AS-i V2 device's parameters . . . . . . . . . . . . . 321
How to access the AS-i V2 digital channels' forcing/unforcing function . . . . . . 323
How to access the SET and RESET commands on AS-i V2 digital channels . 324
How to modify the value of an analog channel . . . . . . . . . . . . . . . . . . . . . . . . . 325
Automatic replacement of a faulty AS-i V2 slave . . . . . . . . . . . . . . . . . . . . . . . 326
How to insert a slave device into an existing AS-i V2 configuration.. . . . . . . . . 327
How to modify the address of an AS-i V2 device . . . . . . . . . . . . . . . . . . . . . . . 328
Chapter 20 Bits and words associated with the AS-i V2 function . . . . . . 329
20.1
Addressing objects associated with the AS-i V2 function . . . . . . . . . . . . . . . . . 330
Addressing Language Objects Associated with Slave Devices Connected to
20.2
Language objects associated with the AS-i V2 function . . . . . . . . . . . . . . . . . . 331
Implicit exchange objects associated with the AS-i V2 function . . . . . . . . . . . . 332
Exchange management: Module %MWxy.MOD.0:Xj or channel
Exchange management: Module %MWxy.MOD.1:Xj or channel
Explicit Exchange Objects: %MWxy.MOD.2 and %MWxy.0.2:Xj to
Constant %KWxy.i.r configuration objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
Explicit Exchange Object: %MWxy.0.74:Xj channel command. . . . . . . . . . . . . 342
Explicit Exchange Object: %MWxy.0.75 to %MWxy.0.138 Parameter
Explicit Exchange Object: Status %MWxy.MOD.2:Xj . . . . . . . . . . . . . . . . . . . . 344
35012326 00 July 2006
11
12
Chapter 21 AS-i V2 operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
AS-i V2 Data Exchange Off Operating Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Chapter 22 AS-i V2 performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
Chapter 23 DFB for AS-i Security Monitor . . . . . . . . . . . . . . . . . . . . . . . . 353
Description of the security function block of the AS-i bus . . . . . . . . . . . . . . . . . 354
Part V Operator Dialog functions . . . . . . . . . . . . . . . . . . . . . . . 361
Chapter 24 General presentation of the Operator Dialog functions. . . . 363
Chapter 25 Built-in DOP functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
25.1
Description of the parameters common to the different DOP functions. . . . . . . 367
25.2
35012326 00 July 2006
Chapter 26 Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423
26.1
26.2
Description of the built-in DOP functions "Data to send" parameter coding . . . 426
PLC status message display: SEND_MSG function . . . . . . . . . . . . . . . . . . . . . 427
PLC checked status message entry: ASK_MSG and GET_MSG function . . . . 431
PLC alarm message display: SEND_ALARM function . . . . . . . . . . . . . . . . . . . 436
Display of status, alarm or a group of messages contained in the CCX 17
memory: ASK_VALUE, DISPLAY_MSG, GET_VALUE, DISPLAY_ALRM and
Display of luminous column LEDS: CONTROL_LEDS function . . . . . . . . . . . . 441
Configuring command keys: ASSIGN_KEYS function . . . . . . . . . . . . . . . . . . . 442
Generic send command: PANEL_CMD function. . . . . . . . . . . . . . . . . . . . . . . . 444
Glossary
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445
Index
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447
35012326 00 July 2006
13
14 35012326 00 July 2006
Завантажити
Публічне посилання оновлено
Публічне посилання на ваш чат було оновлено. You may view and manage your chat links after registration here.
Публічне посилання на документ
Реклама
