Discrete output channel parameters. Schneider Electric Software PLC Application-Specific Functions, Junior/Pro, 4.5

Below you will find brief information for PL7 Junior/Pro.This user guide provides detailed information on software implementation of applications (except communication applications) on Premium/Atrium using PL7 software,covers configuration, symbolization, programming, debugging along with I/O control & fault identification for PLC Application.

PDF

Document

Configuration of the discrete specific application

6.3 Discrete output channel parameters

Presentation

Subject of this section

What's in this

Section?

This section presents the different output channel parameters by type of Discrete module.

This section contains the following topics:

Topic

Discrete output parameters for in-rack 8-channel modules.

Discrete output parameters for in-rack modules with over 8 channels

Parameters of 8, 10 or 12 channel TBX discrete outputs remoted on the FIPIO bus

Parameters of 16 channel TBX discrete outputs remoted on the FIPIO bus

Momentum Parameters of Momentum discrete outputs remoted on the FIPIO bus

Parameters of IP67 discrete outputs remoted on the FIPIO bus

Page

100 35012326 00 July 2006

Configuration of the discrete specific application

Discrete output parameters for in-rack 8-channel modules.

Presentation 8-channel discrete output modules have parameters per channel or for all channels.

Parameters

TSX DSY 08R5A

TSX DSY 08S5

TSX DSY 08T2

TSX DSY 08T22

TSX DSY 08T31

TSX DSY 08R5

The table below shows the parameters available for each in-rack 8-channel discrete output module.

Group of 8 channels

Module Reference Associated task

TSX DSY 08R4D Mast / Fast

Mast / Fast

Reactivation

Programmed / Automatic

Fallback mode

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Supply fault monit.

Active / Inactive 0 / 1

/ 1

Channel by channel.

Fallback value

0 / 1

Note: Parameters in bold correspond to the parameters configured by default.

35012326 00 July 2006

101

Configuration of the discrete specific application

Discrete output parameters for in-rack modules with over 8 channels

Presentation Discrete output modules with more than 8 channels have parameters per channel or for all channels.

102 35012326 00 July 2006

Configuration of the discrete specific application

Parameters

Module

Reference

TSX DSY 16S5

TSX DSY 16T2

TSX DSY 16T3

TSX DSY 32T2K

TSX DSY 64T2K

TSX DSY 16R5

TSX DSY 16S4

Number of outputs

Associated task

Mast / Fast /

None

Mast / Fast /

None

Mast / Fast /

None

Mast / Fast /

None

Mast / Fast /

None

Mast / Fast /

None

Mast / Fast /

None

TSX DMY 28 FK 12 (output part) Mast / Fast /

None

TSX DMY 28RFK 12 (output part) Mast / Fast /

None

TSX PAY 262

The table below shows the parameters available for each in-rack discrete output module with more than 8 channels.

Group of 8 channels

2 (output part)

4 (output part)

Mast / Fast /

None

Reactivation

Programmed /

Automatic

Programmed /

Automatic

Programmed /

Automatic

Programmed /

Automatic

Programmed /

Automatic

Programmed /

Automatic (1)

Programmed /

Automatic (1)

Fallback mode

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Supply fault monit.

Channel by channel.

Fallback value

0 / 1

Active /

Inactive

Active /

Inactive

Active /

Inactive

Active /

Inactive

Active /

Inactive

0 / 1

0 / 1 /

Continuous

(2)

Key:

(1)

(2)

Reactivation is chosen globally for the 12 output channels.

Only for TSX DMY 28 RFK.

Note: z z

Parameters in bold correspond to the parameters configured by default.

The modules' first group of channels (addresses from 0 to 7) is always assigned to a Mast or Fast task. For subsequent groups the following additional option is available: None (no task associated with the group of unused channels).

35012326 00 July 2006

103

Configuration of the discrete specific application

Parameters of 8, 10 or 12 channel TBX discrete outputs remoted on the FIPIO bus

Presentation The 8, 10 or 12 channel discrete TBX output modules have parameters per channel, per group of 8 channels or for all channels.

Parameters

Module

Reference

TBX ESP 08C22

TBX DSS 1235

TBX DMS 1025

The table below shows the parameters available for each 8, 10 or 12 channel TBX discrete output module remoted on the FIPIO bus.

Number of outputs

Module

Associated task

Mast / Fast

2 (output part) Mast / Fast

Group of 8 channels

Reactivation Fallback mode

Programmed

/ Automatic

Fallback /

Maintain

Programmed

/ Automatic

Fallback /

Maintain

Fallback /

Maintain

Channel by channel

Fallback value

0 / 1

Wiring

Check

Yes / No

0 / 1

0 / 1 -

Note: Parameters in bold correspond to the parameters configured by default.

104 35012326 00 July 2006

Configuration of the discrete specific application

Parameters of 16 channel TBX discrete outputs remoted on the FIPIO bus

Presentation The 16 channel discrete TBX output modules have parameters per channel, per group of 8 channels or for all channels.

Parameters

Module

Reference

TBX CSP 1625

TBX DSS 1622

TBX ESP 1622

TBX DSS 16C22

TBX CSP 1622

TBX DSS 1625

TBX DMS 1625

The table below shows the parameters available for each 16 channel TBX discrete output module remoted on the FIPIO bus.

Number of outputs

TBX DMS 16C22 16

TBX DMS 16C222 16

8 (output part)

TBX DMS 16S44 8 (output part)

TBX DMS 16P22 (1)

Module

Associated task

Mast / Fast

Group of 8 channels

Reactivation Fallback mode

Programmed

/ Automatic

Programmed

/ Automatic

Programmed

/ Automatic

Programmed

/ Automatic

Programmed

/ Automatic

Fallback

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback

Maintain

Fallback

Maintain

Programmed

/ Automatic

Programmed

/ Automatic

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Fallback /

Maintain

Channel by channel

Fallback value

Wiring

Check

0 / 1 -

0 / 1

0 / 1 -

Yes / No

Key:

(1) 8 programmable output channels.

Note: Parameters in bold correspond to the parameters configured by default.

35012326 00 July 2006

105

Configuration of the discrete specific application

Momentum Parameters of Momentum discrete outputs remoted on the FIPIO bus

Presentation

Parameters

The discrete Momentum output modules on the FIPIO bus have parameters for all channels.

The table below shows the parameters available for each Momentum discrete output module.

Module Reference Number of inputs

170 ADO 340 00

170 ADO 350 00

170 ADO 530 50

170 ADO 540 50

170 ADO 730 50

170 ADO 740 50

170 ADO 830 30

170 ADM 350 10

170 ADM 350 11

170 ADM 350 15

170 ADM 370 10

170 ADM 390 10

170 ADM 390 30

170 ADM 690 50

170 ADM 690 51

170 ADM 850 10

170 ARM 370 30

16 (output part)

8 (output part)

12 (output part)

8 (output part)

16 (output part)

8 (output part)

Associated task (for the module)

Mast / Fast

Note: Parameters in bold correspond to the parameters configured by default.

106 35012326 00 July 2006

Configuration of the discrete specific application

Parameters of IP67 discrete outputs remoted on the FIPIO bus

Presentation

Parameters

The Discrete IP67 output modules on the FIPIO bus have parameters for all channels.

The table below shows the parameters available for each Momentum discrete output module.

Module Reference Number of inputs

TSX EMF 16DT2

TSX ESF 08T22

8 (output part)

Associated task (for the module)

Mast / Fast

Note: Parameters in bold correspond to the parameters configured by default.

35012326 00 July 2006

107

Key features

Software implementation of PLC applications
Configuration, debugging, and exchange management
Detailed information for Premium/Atrium PLCs
Application-specific functions using PL7 software
I/O control and fault identification

Frequently asked questions

This manual covers the software implementation of applications (except communication applications) on Premium/Atrium using PL7 software.

Application-specific functions are automated functions that interface with the control part (the PLC program) and the operational part (sensors, actuators, and man/machine interfaces).

An application-specific function is installed using standard PL7 tools and application-specific screens, configuration screens, adjustment screens, debug screens, language objects and instructions.