E
N
G
L
I
S
H
The V5->V52 (TXT RP XTL V52E) update kit :
This kit contains a TXT RP XTL V52 protection key. The execution rights of the V52 software are the same as those for V5 software. If the working key for the station already contains all the execution rights of the update kit software, there is nothing to do : the working key for the station is already created. Otherwise, the missing rights must be transferred by :
• inserting the working and the backup keys in slots A and B of the station or of the key support,
• restoring the rights (Restore function) of the station backup key to its working key,
Result : the working key becomes original key again and the backup key becomes a blank key,
• leaving the original key in the station,
• inserting the TXT RP XTL V52 update kit protection key, selecting the rights which it contains and transferring them (Transfer function) to the original key,
Result : the update kit key becomes blank and the original key contains the V52 rights.
• saving (Backup function) the original key to one of the blank keys,
Result : the original key becomes the working key for the station and the blank key becomes the backup key,
• keep the backup key in a safe place.
All the software can now be started from this station.
General compatibility rules
Compatibility of workshops in relation to the function and application levels :
• A V52 station provides programming and operation of V5 applications on TSXV5/PMXV5 type stations with V5 functions.
The software workshop functions are level V52 but the PL7 applications remain at level V5 for
V5 stations.
PL7-3 applications on V5 stations remain at level V5 or can be changed by PL7-3, if necessary, to level V52.
• A V52 station provides programming and operation of V4 (or V3) applications on TSXV4/PMXV4
(TSXV3) type stations with V4 (or V3) functions.
Software workshop functions are level V52 but PL7 applications remain at level V4 on V4 stations and at level V3 for the V3 stations.
V4 applications can be changed to level V5 by copying/pasting the PL7 function icons of the V4 stations to the V5 stations. Some preparation is required before using this copying procedure (the complete procedure is described in the X-TEL V52 software workshop manual (TXT DM XTEL
V52E).
• While an application remains at level V4 on a V4 station, it can still be processed by V4, V42, V5 and V52 workshops; in this case, the V52 workshop simply offers additional working comfort and improved productivity.
The procedures for application migration are developed for :
- all software in the X-TEL and MINI X-TEL software workshop installation manuals (TXT L BASE
V5E and TXT L BJR V5E- part A - Section 3.5),
- each tool or function in the corresponding installation manual.
___________________________________________________________________________
14
