Disposal Requirements Under WEEE Regulations. Beijer Electronics BoX2 pro
Add to My manuals28 Pages
advertisement
![Disposal Requirements Under WEEE Regulations. Beijer Electronics BoX2 pro | Manualzz Disposal Requirements Under WEEE Regulations. Beijer Electronics BoX2 pro | Manualzz](http://s1.manualzz.com/store/data/068935472_1-ae0e7da622bc6207922f473eec7134dd-360x466.png)
8
Safety Precautions
26572-2011 standard. But still complies with the EU RoHS Directive 2011/65/EU.
X: 表明该有害物质至少在部件的某一均质材料中的含量超出 GB/T 26572-2011 规定
的限量要求。但仍然符合 EU RoHS 指令 2011/65/EU 。
1.3 Disposal Requirements Under
WEEE Regulations
For professional users in the European Union: If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.
For disposal in countries outside of the European Union: If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.
1.4 UL and cUL Installation
Caution:
This section is only valid for UL labeled X2 panels.
•
•
This equipment is suitable for use in Class 2 non-hazardous locations only.
[Combinations of equipment in your system are subject to investigation by the local authority having jurisdiction at the time of installation].
All devices have to be supplied by a Class 2 power supply.
Warning:
Only UL and cUL approved expansion units are allowed to be connected to the port designated “EXPANSION”. At the moment there are no such units evaluated or allowed.
SEULES LES UNITÉS D'EXTENSION CERTIFIÉES UL ET cUL PEUVENT ÊTRE RACCORDÉES AU PORT DÉSIGNÉ « EXPANSION ».
À L'HEURE ACTUELLE, AUCUNE UNITÉ DE CE TYPE N'A ÉTÉ TESTÉE
OU AUTORISÉE.
•
•
This equipment is suitable for use in Class 2 non-hazardous locations only.
[combinations of equipment in your system are subject to investigation by the local authority having jurisdiction at the time of installation].
All devices have to be supplied by a Class 2 power supply.
Warning:
Only UL and cUL approved expansion units are allowed to be connected to the port designated “EXPANSION”. At the moment there are no such units evaluated or allowed.
SEULES LES UNITÉS D'EXTENSION CERTIFIÉES UL ET cUL PEUVENT ÊTRE RACCORDÉES AU PORT DÉSIGNÉ « EXPANSION ».
À L'HEURE ACTUELLE, AUCUNE UNITÉ DE CE TYPE N'A ÉTÉ TESTÉE
OU AUTORISÉE
Beijer Electronics, MAEN275
advertisement
Related manuals
advertisement
Table of contents
- 7 1 Safety Precautions
- 7 General
- 7 Hazardous Materials
- 8 Disposal Requirements Under WEEE Regulations
- 8 UL and cUL Installation
- 9 During Installation
- 10 During Use
- 10 Service and Maintenance
- 10 Dismantling and Scrapping
- 11 2 Installation
- 11 Installation Process
- 12 Connections to the Controller
- 13 Other Connections and Peripherals
- 15 3 Technical Data
- 17 4 Chemical Resistance
- 17 Metal Casing
- 19 5 Operator Panel Drawings
- 19 Connectors
- 19 Communication Ports
- 20 BoX2 pro Outline
- 21 6 Additional Installation Tips
- 21 Grounding the operator panel
- 22 Ethernet Connection in the Operator Panel
- 23 To Achieve Better EMC Protection
- 24 Ambient Temperature
- 25 Safety
- 26 Galvanic Isolation
- 27 Cable and Bus Termination RS