Cleaning with Attachments. Bissell 86T3, 86T3 BIG Green Deep Cleaning Machine

Cleaning with Attachments

Upholstery Cleaning Tips

If using to clean upholstery, check upholstery tags.

• Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your deep cleaning machine. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it) or says “Dry Clean Only”, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.

• Check for colorfastness in an inconspicuous place.

• If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.

• Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.

1. Connect solution hose to the hose connection point on machine, next to Flow Indicator.

Insert hose and turn clockwise until locked into place.

2. Open Hose Latch on the front of the machine and insert hose into place. Turn clockwise until locked into place.

3. Attach the cleaning tool to the end of the hose.

4. Clean by pressing the red trigger to spray solution onto the area to be cleaned.

Slowly move the tool back and forth over the soiled surface.

Caution: Do not overwet.

5. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed.

WARNING

To reduce the risk of injury, use extra care when cleaning on stairs. Keep machine on a level surface.

6 BISSELL.com