Advanced using example. Christie CCM-LX, LX380 LCD x3, LX380L, LX450 LCD x3
Add to my manuals
128 Pages
advertisement
Chapter 5 Network Capture
Advanced using example
Displays the presentation data stored in the computer by using the wireless mouse function from the projector.
1.
Start capturing of the computer PC1 by using the projector.
Select “Network Capture” icon from the menu and select "PC1" and then select "Connect".
( p.75)
=> The Network Capture software installed in the selected computer will start capturing.
2.
On the PC1 capture image projected on the screen, search a presentation file data stored in the PC1 by using the wireless mouse function of the remote control supplied with the projector.
3.
Select a desired file and double click with the remote control .
=> The application by which the document was created starts and the projector projects the presentation picture on the screen.
4.
Start the presentation.
=> By using wireless mouse function, control the page browsing and some other operations for the PC1.
For further instructions of the wireless mouse, please refer to the projector’s owners manual.
On the projected screen using with the network capture, the shape of the mouse pointer differs from the one on the computer’s screen.
* PC provides the Network Capture.
PC1 PC2
Project a screen image of PC1 with
PC2.
PJ2
Capture
PC3 PC4
* Controls PC1 with wireless mouse.
PC5
76
Setting condition
Projector
Input mode: Network
Network Unit
Registering the connection: The IP address of the computer and proper parameter must be set to the PC1. ( p.71-72)
Mouse Display (Wireless mouse) : "On" ( p.74, p.75)
Computer PC1
Software: The Network Capture software is installed correctly and its icon appears on the task bar.
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Compliance
- 4 Federal Communications Commission Notice
- 9 Chapter 1 Preparation
- 10 Features
- 13 Operating environment of CCM-LX
- 14 Before use
- 17 Chapter 2 Installation
- 18 Flow of installation
- 19 [1] Name and function of each part
- 20 [2] Installation and network configuration
- 20 Mounting
- 21 Connection of LAN cable
- 22 Network configuration
- 24 Network PIN code setting
- 25 How to enter the numbers with the remote control 10-key buttons
- 26 Notice about system construction
- 27 [3] Installing the software
- 27 Network Viewer & Capture 3 installation
- 29 File Converter 2 Installation
- 31 Chapter 3 Basic Setting and Operation
- 32 Login the setting page of the projector
- 32 1. Enter the IP address
- 32 2. Select a display mode and login
- 33 3. Display of main setting page
- 34 How to use the setting page
- 36 Initial setting
- 37 Network PIN cord setting
- 37 PJLink and password setting
- 38 Date and time setting
- 39 Network configuration
- 40 E-mail setting
- 42 Examples: Type and contents of alert mail
- 44 SNMP setting
- 47 Chapter 4 Controlling the Projector
- 48 Power control and status check
- 50 Controls
- 50 Input
- 51 System
- 52 Image adjustment
- 53 Sound
- 54 PC adjustment
- 55 Setting up the projector
- 58 Save the controls and settings
- 58 Store/free the settings
- 59 Check the saved items
- 59 Load a control set
- 60 Timer setting
- 60 How to set the timer
- 61 Check the timer events
- 61 Change the event mode
- 63 Projector information
- 65 Multi-control
- 65 Controlling and setting the multi-projectors
- 66 Start/stop the multi control
- 67 Register the projector
- 67 Confirmation of registered projector
- 68 Change the mode of the registered projector
- 68 Status
- 69 Check & Change page in the light mode
- 69 Controlling all together
- 69 Setting all together
- 70 Viewer auto setting all together
- 71 Chapter 5 Network Capture
- 72 About Network Capture function
- 72 Launching the Network Capture
- 72 Commands on the task bar
- 73 Parameter set up
- 74 Using the Real Time Capture
- 74 Registering the computers
- 75 [1] Control by the computer
- 76 [2] Control by the web browser
- 77 [3] Control by the projector
- 78 Advanced using example
- 79 Using the Network Communication
- 80 Settings before using the Network Communication
- 81 Description of capture editing window
- 83 How to use the Network Communication
- 83 Start the communication
- 83 Join the communication (only for Sub PC)
- 83 Exit from the communication (only for Sub PC)
- 83 End the communication
- 83 Acquire and release of editing authority
- 84 Edit capture image
- 86 Network Communication operation and change of state
- 87 Executing the forcing mode
- 88 Error information
- 89 Chapter 6 Network Viewer
- 90 Creating the available data [Network Viewer 3]
- 90 [1] How to use the Network Viewer 3 (File Converter 1)
- 94 [2] How to use the Network Viewer 3 (File Converter 2)
- 95 Creating a program file [Program Editor]
- 95 Procedure of making program
- 97 Setting up the display order and time of the images
- 100 Using the Network Viewer function
- 100 [1] Control by the web browser
- 104 [2] Control by the projector
- 107 Chapter 7 Appendix
- 108 Examples of connection
- 110 Use of telnet
- 112 Web browser setting
- 113 Examples: OS/Browsers
- 117 Product specification
- 118 Port specification