[2] Control by the projector. Christie CCM-LX, LX380 LCD x3, LX380L, LX450 LCD x3

102

Chapter 6 Network Viewer

Error information

Error type Description

File Error It is displayed when the network unit cannot acquire the correct file images from the FTP server, or when the master projector is turned off during the multi-control.

Click Error button to check the details.

Connection Error It may be displayed when the slave projector is using the Network Viewer or Capture function during the multi-control. Check which projector has an error , see item "Multi Control/Check & Change". ( p.65-66)

When the file error is occurred during the auto-display, you may have the alert e-mail message.

For further information, please see item "3 Option selection for sending alert mail". ( p.40)

[2] Control by the projector

PC1 PC2

Project JPEG images with PC2.

PJ2 PJ1

JPEG

PC3

Prog.

JPEG

PC4

PC5

PC6

Select input mode of the projector to "Network" previously.

1.

Select "Network Viewer" in the "Network" menu. Press point button or SELECT button.

2.

Select "Display mode" and press SELECT button, and then select "Auto" or "Manual" and then press SELECT button. When selecting "Auto", set "Display length", "Endless play" and "Repeat times".

3.

Select "Connect" and then press SELECT button to start displaying. The images in the

FTP server are displayed on the screen.

It enables you to browse the images by using the point buttons !

on the projector.

on the remote control or

: Previous image display,

!

: Next image display

4.

To end displaying, select "Disconnect" and then press SELECT button.

CCM-LX User Manual

020-000326-01 Rev.1 (10-2010)

Using the network viewer function

Item Description

Display mode ..... Selecting Auto display mode or Manual display mode.

Auto.....................Displays image automatically by setting "Display length" and "Repeat times"

Manual...............Controls image display (browsing image backward or forward) manually.

Display Length .. Display period of the image.f (3 to 240 sec.)

Endless play ........ Set "On" if the endless playback mode.

Repeat times ...... repeat times (255 times maximum)

"0" is displayed when "Endless play" is set to "On".

Connect ................. Connecting to FTP server, and starting to displaying.

Disconnect ........... Disconnecting to FTP server, and the end displaying.

In the automatic displaying mode [Auto], when pressing Point button , projector stops automatic displaying and sets into the manual displaying mode. When pressing Point button , it starts automatic displaying again.

The image data used for this function are the program or folder that the Network Viewer function used last time. The projector cannot specify particular images or file servers itself.

The display period is greatly affected by the network environment or the operation of multi control, so it may not display the image as the specified display period.

CCM-LX User Manual

020-000326-01 Rev.1 (10-2010)

103

Chapter 6 Network Viewer

104

CCM-LX User Manual

020-000326-01 Rev.1 (10-2010)