HD Receiver Setup. LG Electronics 3322LLHH3300, 3322LLHH2200, 2266LLHH2200, 3322LLHH4400, 3322LLHH5500, 42LH49**, 2266LLUU5500, 22LH20**, 3377LLHH3300, 32LF25**


Add to my manuals
176 Pages

advertisement

HD Receiver Setup. LG Electronics 3322LLHH3300, 3322LLHH2200, 2266LLHH2200, 3322LLHH4400, 3322LLHH5500, 42LH49**, 2266LLUU5500, 22LH20**, 3377LLHH3300, 32LF25** | Manualzz

EXTERNAL EQUIPMENT SETUP

■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment.

This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the Plasma TV models.

Image shown may differ from your TV.

HD RECEIVER SETUP

■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive

Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

Connecting with a Component cable

1

Connect the video outputs (Y, P

B

, P

R

) of the digital set

TV.

2 Connect the audio output of the digital set-top box to

1

2

3 Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

4 button on the remote control.

Signal

480i/576i

480p/576p

720p/1080i

1080p

Component

O

O

O

O

(50/60Hz only)

HDMI

X

O

O

O

(24Hz/30Hz/50Hz/60Hz)

27

28

Connecting a set-top box with an HDMI cable

1

Connect the digital set-top box to H DM VII IIN

2(Except for 19/22LH20**),, H DM

19/22LU40**, 19/22LU50**,

1, H DM

2

3

32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) jack on the TV.

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

M II 1 , H M II 2 (Except for 19/22LH20**),

M II 3 (Except for 19/22LU40**, 19/22LU50**,

19/22/26/32/37/42LH20**, 32/37/42LF25**) or

M II 4 (Only 32/37/42/47LH49**, 32/37/42/47LH50**,

32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) input source using the IIN

!

NOTE

Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

Connecting with an HDMI to DVI cable

1 jack on the TV.

2 Connect the audio output of the digital set-top box to

3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

4 MII1 input source using the IIN on the remote control.

1

1 2

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 106.7 cm (42") LCD
  • Full HD 1920 x 1080 pixels 16:9
  • 500 cd/m² 2.4 ms
  • 230 W

Related manuals

Frequently Answers and Questions

How do I connect my Blu-ray player to the TV?
You can connect your Blu-ray player to the TV using an HDMI cable. Simply connect one end of the HDMI cable to the HDMI port on the back of the TV and the other end to the HDMI port on the back of the Blu-ray player.
How do I use the built-in DVD player?
To use the built-in DVD player, simply insert a DVD into the DVD slot on the front of the TV. The DVD will automatically begin playing.
How do I adjust the volume on the TV?
You can adjust the volume on the TV using the volume buttons on the remote control. You can also adjust the volume using the volume buttons on the side of the TV.

advertisement

Table of contents