Parameter Description import-extcommunity
As a best practice, the import targets configured for the following objects do not match the export targets configured for the EVPN instances created in cross-connect group view:
•
VPN instances.
•
The public instance.
•
EVPN instances created in VSI view, VPN instance view, and public instance view.
6. (Optional.) Apply a tunnel policy to the EVPN instance. tunnel-policy tunnel-policy-name
By default, no tunnel policy is applied to an EVPN instance.
For more information about this command, see EVPN Command Reference .
Configuring SRv6 SIDs
1. Enter system view. system-view
2. Enable SRv6 and enter SRv6 view. segment-routing ipv6
3. Configure a locator and enter SRv6 locator view.
locator locator-name [ ipv6-prefix ipv6-address prefix-length [ args args-length | static static-length ] * ]
4. Configure the opcode portion.
Configure End.DT2U SIDs. opcode { opcode | hex hex-opcode } end-dt2u vsi vsi-name
Configure End.DT2UL SIDs. opcode { opcode | hex hex-opcode } end-dt2ul vsi vsi-name
Configure End.DT2M SIDs. opcode { opcode | hex hex-opcode } end-dt2m vsi vsi-name
Applying a locator to an EVPN instance
About this task
Perform this task to allocate SRv6 SIDs from a locator to the VSIs bound to an EVPN instance.
Procedure
1. Enter system view. system-view
2. Enter VSI view. vsi vsi-name
3. Enter VSI EVPN instance view. evpn encapsulation srv6
4. Apply a locator to the EVPN instance. segment-routing ipv6 locator locator-name [ dt2u-locator dt2u-locator-name ] [ dt2ul-locator dt2ul-locator-name ]
291
