Install software. Philips GoGear SA1OPS16, SA1OPS16K/02, GoGear SA1OPS32, SA1OPS32K/02, SA1OPS08K/02, SA1OPS16K, Opus 16 GB, SA1OPS08K, GoGear SA1OPS08

Install software

GoGear opus comes with the following software:

• Philips Device Manager (helps you get firmware updates for GoGear Opus)

• Media Converter for Philips (helps you convert and transfer video files for

GoGear opus)

• Windows Media Player (helps you convert and transver music and picture files for GoGear Opus)

• Napster player (helps you convert and transfer music files for GoGear Opus)

Important:

Remember to install the software provided in the supplied CD-RoM for music and/or video transfer.

Important: Before installing the software, check that your computer meets the requirements (see section System requirements in this user manual).

1

Connect GoGear opus to your computer.

2

Insert the CD that comes with GoGear opus into the CD-RoM drive of your computer.

3

Follow the on-screen instructions to complete the installation of the software.

If the installation program fails to start automatically:

1

Browse the CD contents with Internet

Explorer.

2

Double click on the file ending with ‘.exe’.

Connect and charge

GoGear opus has a built-in battery that can be charged through the USB port of a computer

(USB cable included).

Note

•

•

For first-time use, allow GoGear Opus to charge for 3 hours.

The charging animation stops and the icon is displayed when the charging process is completed.

Connect GoGear Opus to a computer

1

Connect the USB plug of the supplied

USB cable to a spare USB port on your computer.

2

Connect the small USB plug of the USB cable to the small USB jack on GoGear opus.

3

Turn on your computer.

» GoGear opus charges.

Battery level indication

The display indicates the approximate levels of the battery status as follows:

100% 75% 50% 25% 0%

» A flashing battery screen indicates that the battery is low. The player saves all settings and switches off within 60 seconds.

8 EN