advertisement
Alternate Patton support for Europe, Middle East, and Africa
(EMEA)
• Telephone support: Standard telephone support is available five days a week—from 8:00 am to 5:00 pm CET ( 0900 to 1800 UTC/GMT )— by calling +41 (0)31 985 25 55
• Fax: +41 (0)31 985 25 26
1.8 SAFETY WHEN WORKING WITH ELECTRICITY
• This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel.
WARNING
• The external AC adaptor shall be a listed limited power source that incorporates a disconnect device and shall be positioned within easy reach of the operator.
Ensure that the AC power cable meets all applicable standards for the country in which it is to be installed, and that it is connected to a wall outlet which has earth ground.
• Do not work on the system or connect or disconnect cables during periods of lightning activity.
In accordance with the requirements of council directive 2002/96/EC on Waste of Electrical and Electronic
Equipment (WEEE), ensure that at end-of-life you separate this product from other waste and scrap and deliver to the WEEE collection system in your country for recycling.
7
advertisement
Related manuals
advertisement
Table of contents
- 3 Warranty Information
- 3 Radio and TV Interference
- 3 CE Declaration of Conformity
- 4 Authorized European Representative
- 4 FCC Part
- 4 Industry Canada Notice
- 6 Compliance
- 6 Safety
- 6 PSTN Regulatory
- 6 Service
- 7 (EMEA)
- 7 Safety When Working With Electricity
- 8 General Information
- 8 Features
- 8 Description
- 9 Installation
- 10 Connecting Power
- 10 Power Input Connector
- 10 External AC universal power supply
- 11 Connecting the Line Port
- 11 Connecting the Circuit Interface
- 13 Operation
- 13 Front Panel LED Status Monitors
- 14 Configuration and Dip Switches
- 14 Switch S1-7: Line Build Out
- 15 Specifications
- 15 Circuit Rates
- 15 Circuit Interface
- 15 Circuit Defaults
- 15 Circuit Connector
- 15 LED Indicators
- 15 Power and Power Supply Specifications
- 16 Environmental
- 16 Transmission Line
- 16 Line Coding
- 16 A.10 Line Interface
- 16 A.11 Line Physical Connection
- 17 Factory Default Dip Switch Configuration
- 17 Switch S1 - Factory Default configuration
- 17 Switch S2 - Factory Default configuration